P460QL1 is a high-yield, quenched and tempered (Q+T) fine-grain structural steel grade specified under the European standard EN 10028-6 for pressure purposes.
Nomenclature Breakdown
P: Indicates "Pressure" purposes (vessels/boilers).
460: Represents the minimum yield strength of 460 MPa (for thicknesses ≤ 50mm).
Q: Stands for "Quenched and Tempered" heat treatment.
L1: Specifies the low-temperature impact test quality. It must meet a minimum impact energy of 27 Joules at -40°C.
Key Technical Specifications
Standard: EN 10028-6 (Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered).
Material Number: 1.8872.
Delivery Condition: Quenched and Tempered (Q+T) to ensure high strength and excellent low-temperature toughness.
Chemical Composition and Mechanical Property
| Grade | C% | SI% | Mn% | P% | S% | N% | B% | Cr% | Mo% | Cu% | Nb% | Ni% | Ti% | V% | Zr% |
| P460QL1 | 0.18 | 0.5 | 1.7 | 0.02 | 0.01 | 0. 015 | 0.005 | 0.5 | 0.5 | 0.3 | 0.05 | 1 | 0.03 | 0.08 | 0.05 |
| Steel Grade | Yield Strength, for product in mm, Mpa | Tensile Strength, Mpa | Elongation, %, min | ||||
| P460QL1 | t≤50 | 50<t≤100 | 100<t≤150 | t≤100 | 100<t≤150 | 19 | |
| 460 | 440 | 400 | 550-720 | 500-670 | |||
applications
Pressure vessels and storage tanks: P460QL1 is widely used in the fabrication of pressure vessels, including spherical tanks, cylindrical tanks, and large storage tanks for oil, gas, and chemical products. Its high yield strength and good low-temperature toughness make it suitable for operating conditions with high internal pressure and low ambient temperatures.
Petrochemical and chemical equipment: It is used to manufacture reactors, heat exchangers, separators, and other key equipment in refineries, chemical plants, and gas processing facilities. The steel's excellent weldability and resistance to brittle fracture ensure the reliability and safety of these critical components.
Power industry applications: P460QL1 is applied in the construction of boilers, pressure parts of steam generators, and high-pressure pipelines in thermal power plants and nuclear power plants. It can withstand high temperatures and pressures while maintaining good mechanical properties.
Offshore and marine structures: Due to its good toughness at low temperatures and high strength, P460QL1 is used in offshore platforms, FPSO units, and other marine structures exposed to harsh environments such as low temperatures, high winds, and corrosive seawater.
General heavy engineering: It is also used in heavy machinery, large-diameter pipes, and structural components that require high strength, good weldability, and excellent impact resistance, such as in the construction of bridges, cranes, and mining equipment.
application conditions
Temperature range: P460QL1 is designed for service in low to moderate temperature environments. It maintains good toughness at temperatures as low as -40°C, making it suitable for cold climates and low-temperature process equipment. However, its long-term use at temperatures above 350°C is generally not recommended to avoid loss of strength and toughness.
Pressure requirements: This steel is suitable for high-pressure applications, typically used in pressure vessels and components operating at pressures from medium to high levels. Its minimum yield strength of 460 MPa ensures sufficient resistance to internal and external pressures, providing structural integrity under demanding loading conditions.
Welding and fabrication conditions: P460QL1 requires appropriate welding procedures to maintain its mechanical properties. Preheating may be necessary for thick plates to prevent cold cracking, especially in low-temperature environments. Interpass temperature control and post-weld heat treatment (PWHT) are often applied to reduce residual stresses and improve toughness in the heat-affected zone.
Environmental conditions: It is suitable for use in various industrial environments, including petrochemical plants, refineries, power stations, and offshore installations. However, in highly corrosive environments such as those with chloride or acidic media, additional corrosion protection measures (e.g., coatings, linings, or cathodic protection) are required to ensure long-term durability.
Loading and structural conditions: P460QL1 is used in structures subjected to static, cyclic, and dynamic loads. It is suitable for heavy engineering applications where high strength, good fatigue resistance, and resistance to brittle fracture are essential, such as in large storage tanks, reactors, and pressure-containing components.
processing
Cutting and blanking: P460QL1 can be cut using flame cutting, plasma cutting, or laser cutting. For thick plates, flame cutting is commonly used, but proper preheating and post-cutting cooling control are needed to prevent thermal cracking. Plasma and laser cutting offer higher precision and faster speeds for medium and thin plates.
Forming and bending: The steel has good cold and hot formability. Cold bending is suitable for plates with moderate thickness, but the minimum bend radius should be respected to avoid cracking. Hot forming is recommended for complex shapes or thick plates, typically performed at temperatures between 800°C and 1100°C, followed by controlled cooling to maintain mechanical properties.
Welding procedures: P460QL1 is weldable by standard methods such as SMAW, GMAW, FCAW, and SAW. Preheating is often required for plates thicker than 25 mm or in low-temperature environments to reduce hydrogen-induced cracking. Interpass temperature should be controlled below 250°C, and post-weld heat treatment (PWHT) may be applied to improve toughness and reduce residual stresses.
Machining: The steel has satisfactory machinability, allowing turning, milling, drilling, and grinding operations. However, due to its high strength, appropriate cutting tools and parameters are necessary to ensure efficiency and tool life. Coolants are recommended to reduce heat and improve surface finish.
Heat treatment: P460QL1 is supplied in the quenched and tempered (Q&T) condition. Additional heat treatment is generally not required, but stress relief annealing may be performed after heavy fabrication or welding to enhance dimensional stability and reduce residual stresses.
Surface treatment and protection: To improve corrosion resistance, surfaces can be cleaned by shot blasting or pickling, followed by coatings such as epoxy, polyurethane, or anti-corrosive paint. In marine or highly corrosive environments, additional protection like cathodic protection may be applied.
Get an valued quotation for P460QL1, Contact GNEE Steel.
Can P460QL1 be used in marine environments?
Yes, P460QL1 can be used in marine environments after anti-corrosion treatment (such as galvanizing, painting). Its corrosion resistance can be improved by anti-corrosion measures to adapt to the humid and salty marine atmosphere.
What is the maximum thickness of P460QL1 plates?
The maximum thickness of P460QL1 plates can reach 200 mm, depending on the manufacturer's production capacity and technical level. Thicker plates are usually used for large pressure vessels and heavy-duty structural parts.
How to identify P460QL1 materials?
P460QL1 materials can be identified by chemical composition analysis, mechanical property testing, metallographic analysis and other methods. In addition, the material mark on the product label can also be used for preliminary identification.
What is the difference between P460QL1 and P460Q?
The main difference is the low-temperature toughness level. P460QL1 has higher low-temperature toughness (test temperature -20℃) than P460Q, and is more suitable for low-temperature working environments. Their yield strength and tensile strength are basically the same.
Can P460QL1 be cold-formed?
Yes, P460QL1 can be cold-formed, but the forming temperature and deformation rate need to be controlled. Excessive cold deformation may lead to work hardening and reduce toughness, so appropriate annealing treatment may be required after forming.
What are the surface quality requirements of P460QL1?
The surface of P460QL1 shall be clean, free of cracks, folds, delaminations, inclusions and other defects. Minor surface defects that do not affect the use can be repaired by grinding, and the depth of repair shall not exceed the allowable deviation of the plate thickness.
What is the delivery state of P460QL1?
P460QL1 is usually delivered in the quenched and tempered (QT) state. Quenching and tempering treatment can improve the strength and toughness of the material, making it meet the technical requirements of various application scenarios.
Can P460QL1 be used to manufacture boilers?
Yes, P460QL1 is a common boiler steel. It can withstand high temperature and high pressure in boiler operation, and its excellent low-temperature toughness can avoid brittle fracture during boiler startup and shutdown at low temperatures.
What is the thermal conductivity of P460QL1?
The thermal conductivity of P460QL1 is about 45 W/(m·K) at room temperature. This thermal conductivity performance ensures that it can conduct heat evenly in high-temperature equipment, avoiding local overheating and damage.
Does P460QL1 have magnetic properties?
Yes, P460QL1 is a ferromagnetic material and has certain magnetic properties. This characteristic should be considered in the design and use of equipment that is sensitive to magnetic fields, such as some precision instruments and equipment.

