What Is Equilateral Angle Steel
Equilateral angle steel, commonly called angle iron, is a long steel section with two sides perpendicular to each other and equal side widths, forming an L-shaped cross section. It can be formed into various stress members according to structural needs and used as a connector between members, and it is widely applied in all kinds of construction.
Specification Representation
Equal angle steel is specified by side width times side width times side thickness in millimeters. For example, 30 by 30 by 3 mm denotes an equal angle with 30 mm side widths and 3 mm thickness. The same section can be expressed by model number, which is the side width in centimeters, such as 3 angle. The designation system is consistent across Chinese, Japanese, European, and American practice, with the dimensions expressed in millimeters or inches as appropriate.
Size Range
Common equal angle sizes range from 20 by 20 by 3 mm up to 200 by 200 by 24 mm or larger, with several thickness options for each side width. Delivery lengths are typically 6 m or 12 m, with fixed lengths available on request. The section is hot rolled per standards such as GB/T 706, EN 10056-1, or ASTM A6 depending on the specification basis.
Material Grades
Common grades include Q235B and Q355B for Chinese projects, SS400 and SM490 for Japanese specification, S235JR and S275JR per EN 10025-2, and ASTM A36 for North American projects. Higher grades such as S355 or A572 Grade 50 are specified where strength governs the design.
Applications
Equal angle steel is used to make frame structures such as high-voltage power transmission towers, main beams of steel bridges, tower crane columns and arms, and workshop columns and beams. It also serves bracing, purlins, machinery frames, racks, cable trays, and connection gussets in buildings and industrial plants.
Selection and Supply
Select the angle size by the required section properties and the grade by strength and toughness needs. Consider surface protection such as hot-dip galvanizing for outdoor service, and specify drilling, notching, or painting to reduce site fabrication. Request mill certificates for traceability on critical projects.
Frequently Asked Questions
Q: How is equal angle steel specified?
A: By side width times side width times thickness, such as 30 by 30 by 3 mm.
Q: What does the model number mean?
A: The model number is the side width in centimeters, such as 3 angle.
Q: What grades are available?
A: Q235B, Q355B, SS400, S235JR, S275JR, and ASTM A36 among others.
Q: What are equal angles used for?
A: Transmission towers, bridge beams, crane structures, frames, and bracing.
Q: What lengths are available?
A: Typically 6 m or 12 m with fixed lengths on request.
Q: Can equal angles be galvanized?
A: Yes, hot-dip galvanizing suits outdoor and corrosive service.
Contact us for equal angle steel stock, custom lengths, galvanizing, and fabrication services for your project.

