Knowledge

Building Structure SSAW ASTM A252 Spiral Welded Steel Tube

Dec 01, 2025 Leave a message

ASTM A252 steel pipe piles are widely used in deep foundation systems, marine engineering, bridge substructures, and heavy civil construction projects.

 

info-429-429

Their high load-bearing capacity and excellent structural performance make them essential for supporting large static and dynamic loads.

Below is a rewritten and enhanced "Application Fields" section with real engineering data points to strengthen authority and technical depth.

 

1. Deep Foundation Piling

 

ASTM A252 pipe piles are commonly utilized for bearing foundations in mid-to-large construction projects.

Typical pipe pile diameters in deep foundations range from Ø 406 mm to Ø 2000 mm.

A252 Grade 3 piles provide up to 66,000 psi (455 MPa) tensile strength, suitable for high axial compression loads.

Large-diameter steel pipe piles can achieve load capacities of 1,000–4,000 kN per pile depending on soil conditions.

Used in high-rise buildings, industrial plants, and infrastructure requiring long-term stability.

Typical Projects:
High-rise towers, subway stations, stadium foundations, airport terminals.

 

2. Micropile Construction

 

ASTM A252 is frequently used in micropile or mini-pile systems, especially in restricted-access sites.

Micropiles typically range from Ø 100–300 mm.

Capable of resisting tensile, compressive, and lateral loads simultaneously.

A252 Grade 2 and Grade 3 piles offer excellent ductility for seismic or vibration-prone areas.

Suitable for underpinning existing buildings or reinforcing unstable slopes.

Typical Use Cases:
Slope stabilization, foundation rehabilitation, seismic retrofitting, tunnel reinforcement.

 

3. Marine and Offshore Structures

 

A252 pipe piles are widely used in marine piling, where corrosion resistance and structural integrity are critical.

Common pile lengths reach 30–50 meters for ports/harbors.

With corrosion coatings, pile lifespan can exceed 40+ years in marine environments.

Grade 3 piles support heavy dynamic loads from waves, tides, berthing forces, and wind.

Used in:
Port docks, seawalls, waterfront piers, offshore platforms, jetty foundations.

 

4. Bridge Foundation Works

 

Many bridge projects rely on ASTM A252 pipes due to their high strength and adaptability.

Large-diameter piles (Ø 600 mm and above) are used for bridge piers and abutments.

Load-bearing capacity of greater than 3,000 kN is common in modern bridge design.

A252 piles are often driven 20–60 meters depending on geotechnical profile.

Applications include:
Highway bridges, railway bridges, river-crossing structures.

 

5. Structural and Manufacturing Industries

 

A252 pipe piles also serve as construction members or load-bearing cylinders in industrial fabrication.

Can be used as caissons, temporary shoring, retaining walls, or pipe-in-pipe composite structures.

Typical wall thickness reaches up to 65 mm for reinforced applications.

Suitable for both onshore and offshore heavy-duty engineering.

Industries served:
Energy infrastructure, petrochemical foundations, heavy equipment bases.

 

6. Cast-in-Place Concrete Pile Shells

 

ASTM A252 pipes are often used as permanent casing for cast-in-place piles.

Ensures precise pile geometry and prevents soil collapse.

Steel casing significantly improves vertical load capacity and pile durability.

Suitable for sites with soft soil, loose sand, or high groundwater table.

 

Contact now

 

 

info-536-393

 

Send Inquiry