Strength comparison of W14x90 and W14x99 beam steel
W14x19 h beam structure has high tensile strength and yield strength, can bear large loads, and has excellent mechanical properties. W14 series H-shaped steels usually have high strength and rigidity.
The flange width of W14x99 h steel profile is slightly larger than that of W14x90 h beam section. W14x99 structural steel beam has higher strength in some aspects, especially in resisting bending moment and shear force.
H-shaped steels of W14x90 and W14x99 steel h profile are high-strength and high-rigidity structural steels, suitable for structures that require strong load-bearing capacity.
The "W" in W14x176 h-shaped beam represents the wide flange, "14" represents the nominal height of the steel section is 14 inches, about 355.6mm, and "176" represents the weight of the steel section per foot length is 176 pounds, about 262.1kg/m.
The cross-sectional area of the W14x176 h-shaped iron beam is about 51.8 square inches (334.2cm²); the moment of inertia (Ix) is about 2350 inches⁴ (about 978.9cm⁴), and the moment of inertia (Iy) is about 459 inches⁴ (about 191.1cm⁴).
