Knowledge

W14x370 W14x398 W14x455 Hot Rolled Steel Beam H Steel video

May 08, 2025 Leave a message

W14x370 h beam material: section height about 370mm, flange width about 395-400mm, web thickness about 18-21mm, flange thickness about 30-33mm.

 

W14x398 h beam steel structure: section height about 398mm, flange width about 400mm, web thickness about 21-25mm, flange thickness about 33-39mm‌.

 

The naming of W14x455 h shaped steel follows the American ASTM standard, where: W stands for wide flange steel; 14 stands for the nominal height (depth) of the steel, in inches, which is about 14 inches; 455 stands for the weight per foot of length, in pounds (lb/ft), which is 455 pounds/foot.

 

The mechanical properties of W14x455 h steel profile depend on the steel grade used, and common materials include ASTM A36 structural steel beam, A992 steel beam or A572, etc.

 

W14x455 h section steel is usually produced by hot rolling process, where the steel billet is rolled at high temperature to ensure material uniformity and surface quality. Compared with welded H-shaped steel, hot rolled steel has lower residual stress and better structural stability.

 

h beam steel

 

Send Inquiry