Knowledge

Why choose ASTM A387 GRADE 11 Class 1?

Jan 07, 2026 Leave a message

ASTM A387 Grade 11 Class 1 is a chromium-molybdenum (Cr-Mo) alloy steel plate designed for welded boilers and pressure vessels in high-temperature service, offering excellent oxidation and creep resistance due to its 1.25% Cr and 0.5% Mo content, with 'Class 1' indicating a lower tensile strength level compared to Class 2, making it ideal for refineries, power plants, and petrochemicals.

info-490-254

Specifications for ASTM A387 Grade 11 Alloy Steel Plates

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
A387 Grade 11 1.25% 0.50%

 

 

Chemical Composition and Mechanical Property

Grade Chemical Composition(%)
C Mn Si P max S max
A387 Grade 11 Class1 (A387GR11CL1) 0.04-0.17 0.35-0.73 0.44-0.86 0.035 0.035
Grade Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) min % Elongation in 2 in.(50mm) min Impacting Test Temperature(°C)
A387 Grade 11 Class1(A387GR11CL1) 415-585 240 22 -20,40,-60

 

Key Applications

Oil & Gas Industry

This material is widely used in refinery core equipment and piping, applied to reactor shells under high pressure/corrosion, hydrotreating/hydrocracking units for desulfurization and oil upgrading, high-temperature storage tanks for oil products, and process piping transporting high-temperature fluids, ensuring structural integrity under cyclic loads.

Petrochemical Industry

It is a preferred option for high-temperature petrochemical equipment, used in chemical reactors for polymerization and alkylation, storage vessels holding ethylene and propylene, and process equipment like heat exchangers, withstanding high temperature, corrosion and pressure fluctuations.

Power Generation Industry

For thermal and combined-cycle plants, it is irreplaceable for key pressure parts: boiler drums separating steam and water under 500°C/10 MPa, headers for fluid distribution, and pipes/reheater tubes resisting thermal fatigue and creep, ensuring power generation efficiency.

General Pressure Vessels

It is a staple for large pressure vessels/components in high-temperature processes (pharmaceutical, food, metallurgy), including flanges and reinforcing rings, meeting ASME VIII/EN 13445 standards with stable strength and corrosion resistance.

Contact now

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

 

What is A387 Grade 11 CL 1 equivalent material?

ASTM A387 Grade 11 Class 1 has corresponding equivalent materials in different national and industrial standards worldwide, which are often used interchangeably in high-temperature pressure vessel scenarios.

 

What is A387 grade 11 material?

The ASTM A387 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum intended primarily for use in welded boilers and pressure vessels designed for elevated temperature service. SSAB can supply A387 Grade 11 to the tension test requirements for Class 1 and/or Class 2.

 

 

 

Send Inquiry