S235J0 is a widely used, non-alloy structural steel grade (EN 10025-2) known for its good weldability, toughness, and cost-effectiveness, offering a minimum yield strength of 235 MPa and guaranteed impact toughness at 0°C (27 Joules), making it suitable for general construction, bridges, machinery, and moderate cold-service applications where low-temperature performance is needed.
Key Characteristics
Grade: S235J0 (also known as 1.0114).
Standard: EN 10025-2 (European Standard for non-alloy structural steels).
Strength: Minimum yield strength of 235 MPa (for thicknesses up to 16 mm) and tensile strength of 360-510 MPa.
Toughness: Tested to provide 27 Joules of impact energy at 0°C (the "J0" signifies this).
Composition: Low carbon content, making it easy to weld and form.
Applications
Buildings and general construction.
Bridges and structural engineering.
Machinery and heavy steel structures.
Containers designed for cold or seawater environments.
Supply Conditions
Typically supplied as hot-rolled, often in normalized or controlled rolled conditions.
Chemical Composition
| Chemical Composition, % (≤) | |||||||||
| Standard | Steel | Steel name (Steel number) | C | Si | Mn | P | S | Cu | N |
| EN 10025-2 | S235 | S235J0 (1.0114) | 0.17 | – | 1.40 | 0.03 | 0.03 | 0.55 | 0.012 |
Mechanical Properties
| Yield Strength (≥ N/mm2); Dia. (d) mm | ||||||||
| Steel | Steel name (Steel number) | d≤16 | 16< d ≤40 | 40< d ≤60 | 60< d ≤100 | 100< d ≤150 | 150< d ≤200 | 200< d ≤250 |
| S235 | S235J0 (1.0114) | 235 | 225 | 215 | 215 | 195 | 185 | 175 |
| Tensile Strength (≥ N/mm2) | |||||
| Steel | Steel name (Steel number) | d<3 | 3 ≤ d ≤ 100 | 100 < d ≤ 150 | 150 < d ≤ 250 |
| S235 | S235J0 (1.0114) | 360-510 | 360-510 | 350-500 | 340-490 |
What is the density of S235J0 steel?
The density of S235J0 steel is approximately 7.85 grams per cubic centimeter (g/cm³), which is equivalent to 7850 kilograms per cubic meter (kg/m³) or 490 pounds per cubic foot (lb/ft³).
This density value is typical for low-carbon and non-alloy structural steels (like the S235 series) and is consistent across similar grades such as S235JR and S275JR, as the small variations in chemical composition between these grades do not significantly affect their overall density.
Key Context:
This density is used for weight calculations in design, logistics, and cost estimation.
It assumes solid, unwrought steel; actual weight can vary slightly with production tolerances, scaling, or surface conditions.
The density remains stable across the temperature range for which S235J0 is designed (up to its melting point).
1. What is S235J0 steel?
S235J0 is a non-alloy structural steel grade according to EN 10025-2, with a minimum yield strength of 235 MPa and guaranteed impact toughness at 0°C.
2. What is the difference between S235JR and S235J0?
The key difference is the impact test temperature: S235JR is tested at +20°C, while S235J0 is tested at 0°C, making it suitable for colder environments.
3. What is the chemical composition of S235J0?
Its typical composition includes max 0.17% Carbon, max 1.40% Manganese, and lower maximums for phosphorus and sulfur compared to some grades.
4. What is the yield strength of S235J0?
The minimum yield strength of S235J0 is 235 MPa for thicknesses up to 16 mm, decreasing slightly for thicker sections as per the standard.
5. What does the 'J0' mean in S235J0?
The 'J0' indicates the steel is Charpy V-notch impact tested at 0°C with a minimum absorbed energy of 27 Joules.
6. Is S235J0 equivalent to ASTM A36?
S235J0 is similar to A36 in strength but is not a direct equivalent due to different standards and its specific low-temperature impact requirement.
7. Can S235J0 be welded?
Yes, S235J0 has good weldability using common methods like SMAW, MIG, and MAG, though pre-heating may be advised for thick sections or in cold conditions.
8. What is S235J0 used for?
It is used in structural applications exposed to colder temperatures, such as outdoor bridges, building frames, supports, and machinery in temperate climates.
9. Is S235J0 corrosion resistant?
No, S235J0 is not corrosion-resistant. It requires protective coatings like paint or galvanization for outdoor or exposed applications.
10. What is the density of S235J0 steel?
The density of S235J0 is approximately 7.85 g/cm³, the same as most common carbon and structural steels.
Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.
