S235J0 is a widely used non-alloy structural steel grade defined by EN 10025-2, known for its good weldability, toughness, and cost-effectiveness. It offers a minimum yield strength of 235 MPa and guaranteed impact toughness at 0 degrees Celsius, which makes it suitable for general construction, bridges, machinery, and moderate cold-service applications where low-temperature performance is needed.
What Is S235J0 Steel?
In the EN 10025 designation system, S indicates structural steel, 235 is the minimum yield strength in megapascals for thicknesses up to 16 mm, J indicates the toughness family, and 0 means the Charpy V-notch impact energy is guaranteed at 0 degrees Celsius. S235J0 is also known as steel number 1.0114. It is a low-carbon, non-alloy grade that is easy to weld and form, and it is one of the most economical structural steels available. The J0 variant is the intermediate toughness option between S235JR, tested at +20 degrees Celsius, and S235J2, tested at -20 degrees Celsius.
Chemical Composition
The composition of S235J0 is kept simple for weldability and economy. Typical maximum limits are carbon of 0.17%, manganese of 1.40%, phosphorus of 0.03%, sulfur of 0.03%, copper of 0.55%, and nitrogen of 0.012%. The low carbon content means the steel can be welded by common processes without special precautions for most thicknesses, although preheating may be advisable for thick sections or in cold conditions. The limited phosphorus and sulfur contents contribute to consistent toughness and forming behavior.
Mechanical Properties
The minimum yield strength of S235J0 is 235 MPa for thicknesses up to 16 mm, decreasing to 225 MPa for 16-40 mm, 215 MPa for 40-100 mm, 195 MPa for 100-150 mm, 185 MPa for 150-200 mm, and 175 MPa for 200-250 mm. The tensile strength is 360-510 MPa for thicknesses up to 100 mm, with slightly reduced ranges for thicker sections. The J0 designation guarantees a minimum Charpy V-notch impact energy of 27 J at 0 degrees Celsius. The density is approximately 7.85 g/cm3, the same as most carbon and structural steels.
Applications of S235J0
S235J0 is used in structural applications where components are exposed to cool or seasonally cold temperatures and require guaranteed toughness at 0 degrees Celsius to prevent brittle fracture. Common applications include outdoor structural steelwork such as bridges, transmission towers, light masts, and outdoor staircases in regions with cold winters; building frames, supports, and roofing for unheated warehouses, industrial halls, and agricultural buildings; general engineering and machinery bases, frames, and components for transportation equipment, agricultural machinery, and material-handling systems operating in cool environments; and infrastructure and safety elements such as guardrails, walkways, and access platforms exposed to seasonal temperature drops.
Equivalent Grades
S235J0 has functional equivalents in other national standards. The US equivalent is often cited as ASTM A36 or A283 Grade D, with similar strength but without the specific 0 degrees Celsius impact requirement. In Japan, JIS G3106 SM400A and SM400B are comparable structural grades. In China, GB/T 700 Q235C and Q235D correspond to the impact toughness levels of the J0 designation. In India, IS 2062 E250 is a comparable grade. These mappings are functional equivalences: each grade is defined by its own standard, and the exact impact testing requirements should be verified against the governing specification for the project.
Frequently Asked Questions
What is the difference between S235JR and S235J0? The key difference is the impact test temperature. S235JR is Charpy V-notch tested at +20 degrees Celsius, while S235J0 is tested at 0 degrees Celsius with a minimum absorbed energy of 27 J, making it suitable for colder environments.
What does J0 mean in S235J0? The J0 designation indicates that the steel is Charpy V-notch impact tested at 0 degrees Celsius with a minimum absorbed energy of 27 J. This provides a safety margin against brittle failure in cooler service conditions.
What is the yield strength of S235J0? The minimum yield strength is 235 MPa for thicknesses up to 16 mm, decreasing stepwise to 175 MPa for thicknesses of 200-250 mm, as defined by EN 10025-2. The tensile strength range is 360-510 MPa for thicknesses up to 100 mm.
Can S235J0 be welded? Yes. S235J0 has good weldability using common methods such as SMAW, MIG, and MAG. Preheating may be advisable for thick sections or when welding in cold conditions, following the applicable welding procedure specification.
Is S235J0 equivalent to ASTM A36? S235J0 is similar to A36 in strength, but it is not a direct equivalent because the grades are defined by different standards and S235J0 carries a specific low-temperature impact requirement at 0 degrees Celsius.
Is S235J0 corrosion-resistant? No. S235J0 is not corrosion-resistant. It requires protective coatings such as painting or galvanizing for outdoor or exposed applications.

