Knowledge

What are the properties of S890Q steel?

Jan 13, 2026 Leave a message

 

info-393-191

 

 

S890Q is a European grade of high-yield-strength structural steel defined under the EN 10025-6 standard. It is a quenched (Q) and tempered (T) steel designed for high-load applications where weight reduction and high strength are critical.

 

1. Key Specifications

Material Number: 1.8940.

Yield Strength: Minimum 890 MPa (for nominal thicknesses up to 50mm).

Tensile Strength: Typically ranges between 940–1100 MPa.

Impact Testing: S890Q specifically requires a minimum impact energy value at temperatures not lower than -20°C. (Note: Variants like S890QL and S890QL1 are tested at -40°C and -60°C, respectively).

 

2. Common Applications

Due to its high strength-to-weight ratio, S890Q is used in safety-critical and heavy-duty industrial sectors:

Lifting & Earthmoving: Booms for mobile cranes, dumper bodies, and chassis for heavy road vehicles.

Structural Engineering: Bridge components, offshore structures, and supporting frameworks.

Energy & Pressure Vessels: Penstocks, spiral cases for power plants, and fixed or transportable storage tanks.

 

info-293-178

S890Q is a very high-strength quenched and tempered structural steel defined by the European standard EN 10025-6. Its properties are optimized for extreme load-bearing applications where maximum strength-to-weight ratio is critical. Here are its key characteristics:

1. Mechanical Properties

Minimum Yield Strength (ReHReH​): 890 MPa – its defining feature, offering exceptional load capacity.

Tensile Strength (RmRm​): Typically 940–1100 MPa.

Elongation at Break: Minimum 10–12% (depending on thickness), indicating limited but sufficient ductility.

Impact Toughness: Guaranteed Charpy V-notch values at specified low temperatures (e.g., ≥ 27 J at -40°C for common sub-grades like S890QL). This ensures resistance to brittle fracture in cold environments.

Hardness: Typically 280–360 HBW, making it highly wear-resistant but challenging to machine.

2. Chemical Composition

Low Carbon Content (usually ≤0.20%) combined with micro-alloying elements like Niobium (Nb), Vanadium (V), Titanium (Ti), and Boron (B).

Added Nickel (Ni), Chromium (Cr), and Molybdenum (Mo) to enhance hardenability, toughness, and strength.

Strict control of Sulfur (S) and Phosphorus (P) to ensure weldability and fracture resistance.

3. Key Material Characteristics

High Strength-to-Weight Ratio: Enables lighter, more compact structures without sacrificing load capacity.

Good Low-Temperature Toughness: When ordered as sub-grades like S890QL (for -40°C) or S890QL1 (for -60°C).

Weldable with Strict Procedures: Requires specialized low-hydrogen consumables, preheating (often 150–200°C), and controlled heat input to avoid hydrogen cracking and HAZ softening.

Poor Machinability: High hardness and strength demand robust tooling, slow speeds, and ample cooling to avoid excessive tool wear.

4. Limitations

Lower Ductility & Fracture Toughness: Compared to lower-strength steels (e.g., S690Q), it is more brittle and sensitive to stress concentrations.

Not Corrosion-Resistant: Requires protective coatings (galvanizing, painting) for outdoor or corrosive environments.

High Cost: Due to complex alloying and precise heat treatment.

 

Typical Sub-Grades & Applications

S890Q / S890QL / S890QL1: Used in super-heavy mobile cranes, advanced mining drill rigs, high-performance military vehicles, offshore mooring systems, and specialized transport equipment where reducing weight is paramount.

 

In summary, S890Q trades off ease of fabrication and ductility for ultimate strength, making it a specialized material for highly engineered, weight-critical structures operated under controlled conditions.

 

 

Contact now

 

 

What is S890Q steel?
S890Q is a very high-strength quenched and tempered structural steel with a minimum yield strength of 890 MPa, designed for extreme load-bearing applications.

What are the properties of S890Q steel?
It offers exceptional strength, good toughness at low temperatures, and weldability with proper procedures, though it is more brittle than lower-grade steels.

Where is S890Q steel used?
S890Q is used in heavy-duty crane booms, advanced mining equipment, high-performance military vehicles, and specialized structural components where maximum strength-to-weight ratio is critical.

How does S890Q compare to S690Q?
S890Q has a higher yield strength (890 MPa vs. 690 MPa) but lower toughness and weldability, making it suitable for more demanding, lightweight designs.

What welding procedures are required for S890Q?
Welding S890Q requires strict preheating (often 150-200°C), low-hydrogen electrodes, controlled heat input, and post-weld stress relief to avoid cracking.

Is S890Q steel corrosion resistant?
No, S890Q is not corrosion-resistant and requires protective coatings like painting or galvanizing for use in exposed environments.

What standards cover S890Q steel?
It is primarily specified under the European standard EN 10025-6 for quenched and tempered high-strength structural steels.

Can S890Q be machined easily?
Machining S890Q is difficult due to its extreme hardness and strength; it requires robust tooling, slow speeds, and ample cooling.

What is the price of S890Q steel plate?
S890Q is significantly more expensive than lower-strength grades, with prices varying based on thickness, quantity, and certification requirements.

 

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

info-500-499

 

Send Inquiry