Knowledge

W27x84 Hot dip galvanized standard H section beam

May 23, 2025 Leave a message

W27x84 Hot dip galvanized standard H section beam

 

GNEE is an H beam supplier with 18 years of production experience. The h type beam we provide is produced in strict accordance with standards, has passed quality certification, can provide quality certificates, and accept third-party testing. We are ready to help you with all your structural h beam needs.

 

‌Material Range‌: S235JR h beam, S275JR steel h beam, S355JR h section steel, S355J0 h shaped steel, S355J2 h beam structure (covering conventional construction steel grades)

 

 

W27x84 wide flange h beam model analysis‌


W27x84 belongs to the American standard wide flange H-beam (W series). The "27" in the model indicates that the section height is about 27 inches (689mm), and "84" represents the theoretical weight of 84 pounds/foot (about 125kg/m).

 

 

W27x84 h section steel section size‌ (measured data)


Height: 678.43mm
Flange width: 252.98mm
Web thickness: 11.68mm
Flange thickness: 16.26mm
‌Section performance‌: The wide flange design significantly improves bending stiffness and stability. The moment of inertia (Ix) and section modulus (Sx) are suitable for medium to high load scenarios, and the strength-to-weight ratio is excellent.

 

 

W27x84 steel h beam material properties


‌Chemical composition‌ (taking ASTM A992/A572Gr50 as an example)
C (carbon): 0.27-0.35%
Mn (manganese): 0.80-1.10%
Si (silicon): 0.93-1.20%
S/P (sulfur/phosphorus): ≤0.025%
Cr (chromium): 0.75-1.20%

 

‌Mechanical properties‌
Yield strength: ≥345MPa
Tensile strength: ≥450MPa
Elongation: ≥18%
It has both high strength and toughness, meeting the requirements of dynamic load and seismic design.

 

 

W27x84 structural h beam application areas


‌Building structure‌: used for industrial plant frames and commercial building floor beams to support medium span loads and optimize space utilization.
‌Industrial equipment‌: as a production line support frame or mechanical base, carrying steady-state operating loads.
‌Infrastructure‌: Suitable for lightweight bridges or conveyor belt supports, simplifying the construction process through standardized design.

 

h profile steel

 

Send Inquiry