Knowledge

S960QL High Strength Steel Plate

Oct 16, 2025 Leave a message

 

Products Description

 

 

S960QL high strength steel is with yield strength between 590Mpa and 960MPa, because of its good welding performance: welding test results show that the -40°C V-type impact of the weld and the fusion line is greater than 60J, and it is widely used in manufacturing 100 Mine truck floor, pumping machinery, excavators, truck cranes, crawler cranes, coal mine hydraulic supports, etc.

info-435-435

Due to the nature of the material it is used extensively in the heavy transport, lifting and mining industry, where huge payloads and risk of material deterioration through excessive abrasion is commonplace.

 

Produced in accordance with EN10025:6:2004, S890QL has good bending and welding capabilities. Please refer to the technical details below referring to S890QL.

 

 

Chemical Composition of S960QL

 

 

Chemical Element Content Weight %
C 0.20
Si 0.80
Mn 1.70
P 0.020
S 0.010
N 0.015
B 0.0050
Cr 1.50
Cu 0.50
Mo 0.70
Nb 0.06
Ni 2.0
Ti 0.05
V 0.12
Zr 0.15

 

 

Mechanical properties

 

 

Specification (mm) Re (Mpa) Rm (Mpa) A (%) Impact temperature (℃) ACP (J) Cold bending d=3a
20 1010 1070 14.5 -40℃ 52 63 41 good
20 1000 1060 16 -40℃ 46 40 46 good
25 995 1050 16 -40℃ 76 53 61 good
25 1000 1050 15.5 -40℃ 66 55 63 good
25 1000 1060 15 -40℃ 66 74 46 good
50 975 1030 16 -40℃ 60 65 63 good

 

 

Welding test results

 

 

Sample serial number Steel plate thickness (mm) Stretching test Bending test Impact test
Rm (Mpa) fracture Location Side bend Notch position Gap form -40 ℃ AKV (J)
E960-1 16 960 Weld intact Weld Center V 62 61 60
E960-2 16 920 Weld intact Fusion line +1.5 V 67 75 71

 

 

Recommended welding process for quenched and tempered

 
Steel grade Welding method Recommended welding consumables pre-heat temperature (℃) Interlayer temperature (℃) Electrode (wire) diameter (mm) Welding process parameters
welding Current (A) welding Voltage (V) Welding speed (cm/min) Line energy (KJ / cm2
960MPa Electrode arc welding (SMAW) J107RH Ok75.78 100-150 ≥100 φ4.0 170 25 15 20
Gas Shielded Welding (GMAW) Union X90 100-150 ≥100 φ1.2 240 30 30 15

 

 

Products Application

 

 

General construction and various engineering machinery, such as drilling rigs, electric shovel, electric wheel dump trucks, mining trucks, excavators, loaders, bulldozers, various cranes, coal mine hydraulic supports and other mechanical equipment and Other structural parts.

 

info-734-737

 

Send Inquiry