S355J2 S275J2 HEB400x300x13.5x24 H beam for factory
S355J2 h shaped beam material characteristics
Grade meaning: "S" stands for structural steel, "355" means the minimum yield strength is 355MPa, and "J2" means that the material still has good impact toughness at -20℃ low temperature environment.
Chemical composition: Carbon (C) content ≤0.24%, manganese (Mn) content ≤1.60%, silicon (Si) content ≤0.55%, phosphorus (P) and sulfur (S) content are both ≤0.025%, and it also contains a small amount of copper (Cu) ≤0.55%, chromium (Cr) ≤0.30%, nickel (Ni) ≤0.50% and other elements. Through reasonable composition design, it has high strength, good weather resistance, weldability and processability.
S275J2 h beam steel structure material characteristics
Grade meaning: "S" stands for structural steel, "275" means the minimum yield strength is 275MPa, and "J2" means it has good impact toughness at -20℃.
Chemical composition: Contains a certain amount of manganese, silicon and other elements, but the specific content is different from S355J2. The content of impurity elements such as phosphorus and sulfur is controlled at a low level to ensure the performance of the steel. Its carbon content is usually ≤0.20%, manganese content is about 1.50% or less, silicon content is ≤0.55%, and phosphorus and sulfur content are both ≤0.025%.
Specifications
HEB400x300x13.5x24 structural h beam has a cross-sectional height of 400mm, a flange width of 300mm, a web thickness of 13.5mm, a flange thickness of 24mm, and a weight of about 155kg per meter.
Application fields
S355J2 h beam structure: often used in occasions with high requirements for strength and low-temperature toughness, such as long-span bridges in bridge construction and bridges in marine environments, which can withstand large loads and harsh environmental conditions; in high-rise buildings, it can be used as a structural support to improve the stability and safety of the building; it is also widely used in petrochemical equipment, crane manufacturing, mining machinery and other fields.
S275J2 h section beam: suitable for general building structures, beams, columns and other structural parts of industrial plants, which can meet the load-bearing requirements of conventional buildings; it is also used in some mechanical manufacturing fields that do not require particularly high strength but have certain requirements for low-temperature toughness, such as transportation equipment and storage containers in low-temperature environments.


