Knowledge

Q355 Steel Introduction: Grades, Properties, and Applications

Aug 27, 2024 Leave a message

What Is Q355 Steel

Q355 is a Chinese low-alloy high-strength structural steel specified in GB/T 1591-2018, introduced to replace the former Q345 grade. The designation Q means yield point and 355 the minimum yield strength in megapascals for thin sections. The series includes quality classes Q355B, Q355C, Q355D, and Q355E, distinguished by Charpy impact test temperature from plus 20 degrees C down to minus 40 degrees C.

Chemical Composition

For Q355B the heat analysis limits are carbon 0.24 percent, silicon 0.55 percent, manganese 1.60 percent, phosphorus 0.035 percent, sulfur 0.035 percent, chromium 0.30 percent, nickel 0.30 percent, copper 0.40 percent, and nitrogen 0.012 percent. Q355C and Q355D progressively tighten phosphorus and sulfur to 0.030 and 0.025 percent respectively, improving toughness for lower service temperatures.

Mechanical Properties

The minimum yield strength is 355 MPa for thicknesses up to 16 mm and decreases gradually with thickness. The tensile strength is 470 to 630 MPa for thicknesses up to 100 mm and 450 to 600 MPa above, with elongation of 17 to 22 percent. Impact energies of 34 J longitudinal and 27 J transverse are guaranteed at the temperature appropriate to the quality class. Typical hardness is about 135 HB and density 7.85 g per cubic centimeter.

Processing Properties

Q355 has excellent hot and cold processing properties, including welding, bending, stamping, and cutting. Its moderate carbon content keeps it weldable by conventional processes without preheating for most thicknesses, while the microalloyed composition provides good compressive strength for pressure-bearing members.

Applications

Q355 is used to manufacture petroleum storage tanks, high-pressure vessels, boilers, ships, power station structures, and other high-load structural parts. It is also widely used for shipping containers, waste storage containers, offshore containers, workshop containers, and toolboxes, where the combination of strength, weldability, and atmospheric corrosion resistance is valuable.

Q355 versus A36

Compared with ASTM A36, Q355 offers significantly higher minimum yield strength, 355 MPa versus 250 MPa, and higher tensile strength, allowing lighter sections for the same load. This makes Q355 more economical for strength-governed designs, while A36 remains a general-purpose choice for less demanding applications.

Frequently Asked Questions

Q: What does Q355 mean?

A: Q indicates yield point and 355 the minimum yield strength in megapascals.

Q: What are the quality classes of Q355?

A: Q355B, Q355C, Q355D, and Q355E with impact testing from plus 20 to minus 40 degrees C.

Q: What replaced Q345?

A: Q355 per GB/T 1591-2018 is the successor grade.

Q: Is Q355 better than A36?

A: Q355 has higher yield and tensile strength, allowing lighter sections.

Q: What applications use Q355?

A: Storage tanks, pressure vessels, boilers, ships, containers, and structural frames.

Q: Can Q355 be welded?

A: Yes, with conventional processes for most thicknesses.

Contact us for Q355 steel plates, beams, and sections with mill certificates and customized processing.

Send Inquiry