-
Q355B Steel Surface Defects: Types, Inspection, HandlingDec 25, 2025Q355B steel, like other hot-rolled structural steels, can exhibit various surface defects originating from continuous casting, rolling, or handling pr
-
How to Differentiate Q890D and Q960DDec 25, 2025Q890D and Q960D are both high-strength quenched and tempered structural steels complying with GB/T 16270 - 2009, marked by the "D" grade whi
-
What are the special requirements for the welding process of SM490?Dec 25, 2025In essence, welding SM490 is a highly controlled process designed to ensure the welded joint possesses the same level of toughness and integrity as th
-
What are the advantages of SM490 in seismic design?Dec 25, 2025The primary advantage of SM490 in seismic design is its certified toughness, which ensures ductile, energy-absorbing behavior—preventing brittle colla
-
Q620D vs Q690D: Design, Processing and Cost ComparisonDec 25, 2025Q620D and Q690D are two representative D-grade high-strength structural steels, both satisfying impact toughness requirements at minus 20 degrees Cels
-
What are the main differences among SM490A, SM490B and SM490C?Dec 25, 2025In many international projects, SM490B and SM490C are directly cross-referenced to European S355J2 and S355K2 grades, or Chinese Q355C and Q355D grade
-
What low - temperature environments is SM490 suitable for?Dec 25, 2025SM490B is suitable for environments down to about -10°C to -15°C, and SM490C extends suitability to approximately -20°C, for structures governed by in
-
Q620D vs Q690D Steel: Differences in Properties and UsesDec 25, 2025Q620D and Q690D are both D-grade low-alloy high-strength structural steels produced to the Chinese GB/T 1591 series, and both must guarantee impact to
-
What are Differences Between Q620E and Q690EDec 25, 2025Q620E and Q690E are two core products in the 600MPa - grade high-strength low-alloy structural steel system, both with the "E" grade that gu
-
How to correctly select the thickness specifications of SS490 according to the design load?Dec 25, 2025Do NOT select thickness based solely on load divided by yield strength. Buckling and deflection will govern in most thin-plate and slender member appl
-
How to Differentiate Q620E and Q690EDec 25, 2025Q620E and Q690E are both high-strength low-alloy structural steels of grade E in China. They can maintain good impact toughness at -40℃ and are mainly
-
How to Differentiate Q500E and Q550EDec 25, 2025Q500E and Q550E are both representative -40℃ low-temperature resistant low-alloy high-strength steels, which are widely used in infrastructure and equ













