Knowledge

S690Q Steel Plate: Corrosion Resistance and Properties

Jan 13, 2026 Leave a message

S690Q is a high-strength, fine-grain structural steel that is quenched and tempered to achieve a minimum yield strength of 690 MPa combined with good toughness. It conforms to EN 10025-6 and is used in heavy-duty applications such as bridges, cranes, and machinery where weight savings and high load capacity are critical. This article describes the properties, chemical composition, corrosion behavior, and protection requirements of the grade.

Designation and Material Overview

In the designation S690Q, S identifies a structural steel, 690 is the minimum yield strength in MPa, and Q indicates the quenched and tempered delivery condition. The steel is a low-alloy high-strength structural steel whose fine-grain structure is achieved through heat treatment, contributing to its strength and toughness. It is considered to have good weldability for its strength class, although proper procedures such as preheating are usually needed, especially for thicker plates. The material offers a high strength-to-weight ratio that makes it attractive for load-bearing and dynamically loaded structures.

Chemical Composition

The heat analysis of S690Q is controlled within the following maximum values: carbon 0.200%, silicon 0.800%, manganese 1.700%, phosphorus 0.025%, sulfur 0.015%, nitrogen 0.015%, boron 0.005%, chromium 1.500%, copper 0.500%, molybdenum 0.700%, niobium 0.060%, nickel 2.000%, titanium 0.050%, vanadium 0.120%, and zirconium 0.150%. The controlled composition is optimized for strength and toughness rather than corrosion resistance, and the micro-alloying elements support the response to quenching and tempering across the plate thickness.

Mechanical Properties

For plates from 8 to 50 mm thick, the minimum yield strength is 690 MPa, the tensile strength is 770 to 940 MPa, the minimum elongation is 14%, and the minimum impact energy is 30 J at -20 C. For plates from 51 to 100 mm, the minimum yield strength is 650 MPa with a tensile strength of 760 to 930 MPa; for plates from 101 to 150 mm, the minimum yield strength is 630 MPa with a tensile strength of 710 to 900 MPa. The same elongation and impact requirements apply across the thickness range. The grade provides excellent load-bearing capacity while maintaining good impact toughness at low temperatures.

Corrosion Resistance and Protection

S690Q is not inherently corrosion resistant. Its chemical composition and microstructure are optimized to achieve the minimum yield strength of 690 MPa through quenching and tempering, not to resist oxidation. Like most carbon and low-alloy structural steels, it is susceptible to rusting when exposed to moisture and oxygen, and its corrosion rate is generally similar to that of other common structural steels. For use in corrosive environments such as offshore, marine, industrial, or outdoor exposure, protective measures are essential. These typically include applied paint systems such as epoxy or specialized industrial coatings, hot-dip galvanizing for long-term protection, and regular inspection and maintenance of the protective layer. S690Q is a high-strength steel, not a weathering or stainless steel, so its outstanding mechanical properties must be coupled with appropriate corrosion protection based on the specific application and environment.

Typical Applications

Typical applications of S690Q include heavy construction equipment such as excavators and loaders, bridges and offshore structures including drilling rigs and windmill supports, cranes and lifting equipment, pressure vessels, and high-load structural elements in various machinery. In these applications the reduced section thickness lowers self-weight and increases useful payload. The grade is also commonly used in mobile cranes, mining equipment, and advanced structural components where a high strength-to-weight ratio is critical, and components are generally welded with low-hydrogen electrodes, preheating, and controlled heat input to preserve the mechanical properties of the base plate.

Frequently Asked Questions

Is S690Q steel corrosion resistant?

No. S690Q is not inherently corrosion resistant and requires protective coatings or paints for use in corrosive environments, in the same way as other carbon and low-alloy structural steels.

What is the difference between S690QL and S690Q?

S690QL is a sub-grade with a specified low-temperature impact toughness requirement, while S690Q is the base grade. Both share the same minimum yield strength of 690 MPa.

What is the chemical composition of S690Q?

S690Q contains carbon, manganese, silicon, and micro-alloying elements such as niobium, vanadium, and titanium, with precise maximum limits that also cover chromium, nickel, molybdenum, copper, boron, and zirconium.

How is S690Q steel welded?

Welding S690Q typically requires low-hydrogen electrodes, preheating, and controlled heat input to maintain its mechanical properties and prevent cracking, with procedures qualified for the plate thickness.

What are the machining guidelines for S690Q?

Machining S690Q requires robust tools, adequate cooling, and slower speeds due to its high strength and hardness, and the same precautions as for quenched and tempered steels apply.

Where is S690Q steel used?

It is commonly used in heavy machinery, mobile cranes, mining equipment, bridges, offshore structures, and advanced structural components where a high strength-to-weight ratio is critical.

Send Inquiry