HEA240 HEB240 S355ML H-section steel beam
S355ML h type steel beam Material characteristics
Type and standard: S355ML is a hot-rolled weldable fine-grained structural steel produced in accordance with European standard EN10025-4.
Chemical composition: The main elements include carbon (C), silicon (Si), manganese (Mn), phosphorus (P), sulfur (S), etc., as well as a small amount of alloying elements such as chromium (Cr), nickel (Ni), molybdenum (Mo), vanadium (V), niobium (Nb), titanium (Ti), etc.
Mechanical properties: The minimum yield value is 355MPa when the thickness is less than 16mm. It still maintains good impact toughness at a temperature not lower than -50℃, with longitudinal impact energy Akv≥27J and transverse impact energy Akv≥16J. The tensile strength is between 470-630MPa.
Delivery state: It is usually delivered in the thermomechanical rolled (TMCP) state, which enables the steel to obtain good comprehensive properties.
Steel specifications
HEA240: Section height 240mm, width 230mm, web thickness 7.5mm, flange thickness 12mm. The cross-sectional area is 51.7 square centimeters, and the theoretical weight is about 40.6 kg/m.
HEB240: Section height and width are both 240mm, web thickness 10mm, and flange thickness 17mm. The cross-sectional area is 72.2 square centimeters, and the theoretical weight is about 56.7 kg/m.
Steel characteristics
High strength: S355ML material h beam itself has high strength, so that HEA240 and HEB240 steel can withstand large loads and are suitable for structures with high load-bearing capacity requirements.
Good toughness: It still has good impact toughness in low temperature environment, which can effectively prevent the structure from brittle fracture at low temperature, and improve the safety and reliability of the structure.
Easy processing: With good weldability and processing performance, it is easy to carry out cutting, welding, bending and other processing operations, and can adapt to various complex engineering needs.
Superior cross-sectional performance: The H-shaped cross-sectional design of the HEA and HEB series has a higher moment of inertia and bending resistance, which can distribute the load more effectively and improve the bearing capacity, while also saving steel and reducing the weight of the structure.


