European standard H-beam HEM100 model details

Cross-section dimensions: total height 120mm, flange width 106mm, web thickness 12mm, flange thickness 20mm (recorded as 120×106×12×20).
The weight per meter is about 41.8kg/m, and the weight design takes into account both strength and economy.

Structural optimization: adopt wide flange and thick web design, the flange thickness is greater than ordinary H-shaped steel, which enhances lateral stability and bending resistance and reduces distortion; the center of gravity of the section is reasonably located to optimize load distribution efficiency.

h shaped steel material and mechanical properties

Main material: high-strength low-alloy steel (HSLA), such as S355J0/J2/S355JR, yield strength ≥355MPa, tensile strength 470-630MPa; in line with European standard EN 10025, and passed EN 10034 tolerance certification.

h beam structure Mechanical properties: high bending strength and shear resistance, suitable for bearing heavy loads and complex stresses; elongation ≥ 22%, good plasticity and toughness, suitable for dynamic loads such as earthquakes.

Heavy industry: large factories, warehouses, equipment support frames (such as crane tracks).
Public buildings: large-span roof structures such as stadiums and exhibition centers.
Transportation infrastructure: bridge main beams, viaduct columns.
Special needs: corrosion-resistant environments such as offshore platforms and power towers.