EN S355NL S355ML HEB600x300x15.5x30 h beam section
S355NL and S355ML are two structural steel materials with different impact performance requirements. Both belong to the steel grades in the European standard and are used in applications requiring higher strength and good welding performance.
S355NL h type beam material characteristics
This is a normalized or normalized rolled weldable fine-grained structural steel.
Impact toughness specifies a minimum value (in N) at -20°C.
Tensile strength: Rm 450-630 MPa; Yield strength: ReL 355-275 MPa; Elongation after fracture: A 21-22%.
S355ML h shaped steel beam material characteristics
Similar to S355NL, but its impact toughness is guaranteed at a lower temperature (-50°C) (in ML).
It has higher low-temperature toughness and good welding performance, suitable for more demanding working environments.
HEB600 h shaped iron beam Specifications
Dimensions: Height 600mm x Width 300mm x Web Thickness 15.5mm x Flange Thickness 30mm
Weight per meter: Approximately 212KG/m (Specific weight may vary depending on the material)
Application: This H-shaped steel is often used in industrial structures, high-rise buildings, bridges and other structures that require high strength and stability.
HEB600x300x15.5x30 h shaped beam Applications
Industrial and civil construction: Mainly used for beam and column components.
Large steel structure projects: Such as petrochemical facilities, power equipment brackets, etc.
Bridge construction: Due to its optimized cross-sectional area distribution and strength-to-weight ratio, it is very suitable for large-span steel bridge components.
Other fields: Including but not limited to shipbuilding, mechanical frame structures, etc.
