Knowledge

Can S690QL1 be machined easily?

Jan 15, 2026 Leave a message

info-502-265

 

 

S690QL1 is a high-strength quenched and tempered alloy structural steel. It offers excellent mechanical properties, suitable for heavy-duty engineering, with good weldability and toughness for demanding applications.

 

 

 

 

 

S690QL1 Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

Cr

S690 QL1

0.20

0.80

1.70

0.020-0.025

0.010-0.015

0.015

0.005

1.50

Cu

Mo

Nb

Ni

Ti

V

Zr

 

0.50

0.70

0.06

2.0

0.05

0.12

0.15

 

 

Grade

S690QL1 Mechanical Property

Thickness

Yield

Tensile

Elongation

Min Impact Energy

 

S690 QL1

mm

Min Mpa

Mpa

Min %

-60

30J

3<t≦50

890

940-1100

11

-60

30J

50<t≦100

830

880-1100

11

-60

30J

100<t≦150

800

820-1000

11

-60

30J

 

Equivalent steel grade of S690QL1

Europe

Germany

France

Sweden

 

EStE 690 V

-

-

 

 

info-238-353processing

1. Primary Manufacturing (Quenching & Tempering)

S690QL1 is produced as a Quenched and Tempered (Q&T) steel.

Austenitizing: The steel is heated to approximately 870–930°C to achieve a fully austenitic structure.

Quenching: Rapid cooling (typically in water) creates a fine-grained, hard martensitic microstructure.

Tempering: Reheating to 550–680°C softens the material to achieve the necessary balance of strength and extreme low-temperature toughness.

2. Hot Processing (Forging & Forming)

If the material must be hot-worked, strict temperature windows are mandatory to avoid degrading its mechanical properties.

Heating: Billets are preheated to 1100–1250°C.

Working Range: Forging should occur between 1200°C and 850°C.

Post-Process: Hot forming above 600°C typically requires a full re-quenching and tempering cycle to restore its original design properties.

3. Welding & Post-Weld Heat Treatment (PWHT)

S690QL1 is weldable using standard processes (GMAW, SMAW) but requires careful heat input management.

Preheating: Typically performed at ≤100°C using oxyacetylene or similar methods to prevent cracking.

Interpass Temperature: Must be limited to ≤180°C to prevent softening of the heat-affected zone (HAZ).

PWHT: To reduce residual stresses, stress relief annealing is ideal at approximately 550°C (Cycle C). This temperature can reduce residual stresses by up to 93% while maintaining the high mechanical properties of the base metal.

4. Cold Working & Machining

Bending: S690QL1 can be cold-formed. Recommended minimum bend radii are 2x thickness (transverse to rolling direction) and 3x thickness (longitudinal).

Cutting: Suitable for thermal cutting (laser, plasma, oxy-fuel) and mechanical methods like drilling or sawing.

Machinability: Fine-grained microstructure allows for good machinability when using high-quality tooling to handle its high hardness (approx. 260–360 HV).

 

Primary Applications

Lifting & Heavy Machinery: Used extensively for crane booms, jibs, and lifting arms where high strength and lightness are critical for operational safety.

Offshore & Marine: Ideal for North Sea or Arctic offshore platforms, naval ships, and marine structures exposed to harsh, freezing maritime environments.

Mining & Earthmoving: Essential for high-stress components in excavators, bulldozers, dump truck bodies, and mining cars that must withstand repetitive shock and heavy loads.

Construction & Infrastructure: Applied in long-span bridges, stadiums, and high-rise buildings. Its use in skyscrapers allows for slimmer columns and more usable internal space.

Defense: Utilized in military vehicles and armored units to reduce weight for better agility while maintaining structural integrity.

 

 

info-612-407Why Choose Us :

You can get the perfect material according to your requirement at the least possible price.

We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.

The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)

We guarantee to give a response within 24hours(usually in the same hour)

You can get stock alternatives, mill deliveries with minimizing manufacturing time.

We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

 

 

Contact now

 

Request a professional quotation for S690QL1  from GNEE Steel.

 

Is S690QL1 suitable for pressure vessels?

Yes, S690QL1 is suitable for pressure vessels under specific conditions. It meets the strength requirements for high-pressure applications, with proper design and certification.

 

Is S690QL1 available in coil form?

S690QL1 is mainly available in plate form. Coil form is rare due to its high strength and heat treatment requirements, which are easier to control for plates.

 

What is the elongation at break of S690QL1?

S690QL1 has a minimum elongation at break of 14% (for 16 mm thickness). This ductility allows for slight deformation before fracture, improving structural safety.

 

Can S690QL1 be bent?

S690QL1 can be bent, but it requires higher bending forces than ordinary steels. Proper bending radius and preheating (for thick plates) prevent cracking during forming.

 

What is the difference between S690QL1 and S690QL?

The main difference is impact toughness: S690QL1 has a lower minimum impact energy (30 J at -20°C) than S690QL, making it suitable for less demanding low-temperature applications.

 

What is the thermal conductivity of S690QL1?

The thermal conductivity of S690QL1 is about 45 W/(m·K) at room temperature, similar to standard steels, facilitating heat transfer in welding and forming processes.

 

Is S690QL1 magnetic?

Yes, S690QL1 is magnetic. As a ferritic steel, it exhibits ferromagnetic properties, which is important for applications requiring magnetic compatibility.

 

What is the cost comparison of S690QL1 vs. ordinary steel?

S690QL1 is more expensive than ordinary carbon steel, but its high strength reduces material usage, offsetting costs in weight-sensitive and high-performance applications.

 

What is the corrosion resistance of S690QL1?

S690QL1 has moderate corrosion resistance, similar to carbon steels. For harsh environments, protective coatings like paint or galvanization are required to prevent rust.

 

Can S690QL1 be used in automotive industry?

Yes, it is used in heavy-duty automotive parts like truck frames and crane components. Its high strength improves load capacity and durability of commercial vehicles.

 

What is the fatigue strength of S690QL1?

The fatigue strength of S690QL1 is approximately 300-350 MPa (for 10⁷ cycles). Proper surface treatment and stress relief improve its fatigue resistance.

 

Send Inquiry