Knowledge

Can S690Q be used in offshore structures?

Jan 15, 2026 Leave a message

 

info-402-453

 

 

S690Q is a high-strength, quenched and tempered structural steel offering a good balance of high yield and tensile strength, toughness, and weldability. It is widely used in heavy‑duty applications such as lifting equipment, high‑rise buildings, offshore platforms, and mining machinery, where reliable performance under heavy loads is essential. Its properties are achieved through controlled quenching and tempering, which refines the microstructure and ensures uniform mechanical characteristics across the material thickness.

 

 

 

 

Chemical composition of S690Q steel according EN 10025-6, %

С

Si

Mn

P

S

N

B

Cr

Cu

Mo

Nb

Ni

Ti

V

Zr

0,20

0,80

1,70

0,025

0,015

0,015

0,005

1,50

0,50

0,70

0,06

2,0

0,05

0,12

0,15

 

Mechanical properties of S690Q steel

Nominal gauge, mm

Minimum yield strength, ReH (MPa)

Ultimate tensile strength, Rm (MPa)

Minimum elongation ratio σ, %

Brinell hardness number, HB (MPa)

> 3 ≤ 50

690

770-940

14

228-278

> 50 ≤ 100

650

760-930

14

225-276

> 100 ≤ 150

630

710-900

14

210-266

 

Analogues to S690Q steel

Germany (DIN)

StE690V

France (AFNOR)

E690T

 

info-392-540Key Applications

Lifting & Heavy Machinery:

Used extensively for crane booms, jibs, and lifting arms. It is also critical for heavy-duty mining equipment like dump trucks and excavators that face extreme cyclic loads.

Civil Infrastructure:

Employed in high-rise buildings and long-span bridges (e.g., Hong Kong's Cross Bay Link) to support extreme axial loads and lateral forces from wind or seismic activity.

Transportation:

Used in trailer frames and special-purpose vehicles to maximize payload while reducing vehicle dead weight.

Energy & Offshore:

Found in offshore drilling platforms, wind turbine supporting structures, and pressure vessels due to its high load-bearing capacity and resilience in harsh marine environments.

 

 

 

Core Advantages

Weight Reduction:

Its yield strength (690 MPa) is nearly double that of standard S355 steel, allowing for 20–40% weight savings through thinner sections.

Enhanced Payload:

In mobile applications, lighter structural weight directly translates to a 10–20% increase in payload capacity and better fuel efficiency.

Cost Efficiency:

While initial material costs are higher, total project costs often decrease by 10–25% due to reduced steel tonnage, smaller foundation requirements, and lower transportation/installation costs.

Ductility and Safety:

Despite its hardness, it maintains a minimum elongation of ~14%, providing high energy absorption during seismic events to prevent brittle failure.

Sustainability:

Leaner designs result in lower raw material usage and a reduced carbon footprint, aligning with 2026 eco-friendly construction standards.

Contact now

 

Contact us at beam@gneesteelgroup.com for pricing, technical support, or customized solutions. We are always ready to support your project.

 

What welding methods are suitable for S690Q?

Suitable welding methods for S690Q include MMA, MIG/MAG, TIG, and submerged arc welding. Matching low-hydrogen electrodes are recommended.

 

Does S690Q require post-weld heat treatment (PWHT)?

PWHT is not always mandatory but is advised for thick sections or high-stress joints to relieve residual stress and improve toughness.

 

What is the hardness of S690Q?

The typical Brinell hardness of S690Q is 220-260 HBW. Hardness may vary slightly with thickness and heat treatment parameters.

 

Can S690Q be machined?

Yes, S690Q can be machined, but it requires sharp tools and appropriate cutting parameters due to its high strength. Coolant is essential.

 

What is the carbon content of S690Q?

The carbon content of S690Q is typically 0.18-0.22%. Low carbon content ensures weldability while maintaining high strength.

 

Is S690Q magnetic?

Yes, S690Q is magnetic. Its ferritic microstructure (tempered martensite) makes it responsive to magnetic fields.

 

What is the impact energy requirement for S690Q?

S690Q requires a minimum impact energy of 30 J at -20°C (Charpy V-notch test), ensuring toughness under dynamic loads.

 

Can S690Q be used in offshore structures?

Yes, S690Q is suitable for offshore structures like platforms and jackets, as it resists high loads and harsh marine environments with proper protection.

 

What is the difference between S690Q and S460Q?

S690Q has a higher yield strength (690 MPa vs. 460 MPa for S460Q) and is used for more demanding, heavy-load applications.

 

How to store S690Q plates to prevent corrosion?

Store S690Q plates in a dry, well-ventilated area, away from moisture and chemicals. Cover with waterproof sheets to avoid rusting.

Send Inquiry