Knowledge

P335GH Pressure Vessel Steel Plate: Properties and Applications

Nov 19, 2024 Leave a message

P335GH is a non-alloy pressure vessel steel plate manufactured according to the European standard EN 10028-2, which covers flat products of steels for pressure purposes with specified elevated temperature properties. The grade has good welding performance and mechanical properties, and is suitable for manufacturing pressure vessels, boilers, and other structural parts that need to withstand pressure. This article reviews the chemical composition, mechanical properties, and principal application areas of the grade.

Chemical Composition

The heat analysis of P335GH is limited to carbon 0.10 to 0.22%, silicon 0.60% maximum, manganese 1.10 to 1.70%, phosphorus 0.025% maximum, and sulfur 0.010% maximum. Total aluminum is at least 0.020% to ensure fine grain practice. Additional elements are limited to chromium 0.30%, copper 0.30%, nickel 0.30%, and molybdenum 0.08% maximum. The controlled composition provides a good balance between strength, weldability, and resistance to deformation and cracking during fabrication, and supports stable mechanical properties in long-term elevated temperature service.

Mechanical Properties

For plates up to 16 mm thick, the minimum yield strength of P335GH is 335 MPa, the tensile strength is 510 to 650 MPa, and the minimum elongation is 20%. The yield strength decreases with plate thickness in accordance with EN 10028-2: from 16 to 40 mm it is 335 MPa, from 40 to 60 mm it is 325 MPa, from 60 to 100 mm it is 315 MPa with a tensile strength of 490 to 630 MPa, from 100 to 150 mm it is 295 MPa with 480 to 630 MPa, and from 150 to 250 mm it is 280 MPa with 470 to 630 MPa. The elongation requirement is 20% minimum across the thickness range, and the plates are normally supplied in the normalized condition to stabilize the microstructure and properties.

Pressure Vessel Applications

P335GH boiler-quality plate is used to manufacture various pressure vessels, such as storage tanks and reactors for the oil, gas, and chemical industries. The grade is also used as a pressure part in boiler construction, where components must resist internal pressure combined with elevated temperature. Because of its stable mechanical properties and good weldability, the material is a common choice for fabricated pressure equipment where reliable long-term performance is required.

Pipeline and Chemical Equipment Applications

P335GH pressure vessel quality steel is used for pipelines that transport high-temperature and high-pressure media, where the combination of yield strength and elevated temperature properties is essential. In chemical equipment, the vessel steel plate is used to manufacture structural parts that operate under corrosive or pressurized process conditions. The good weldability of the grade allows the fabrication of complex welded structures with conventional arc welding processes, and the normalized delivery condition ensures consistent toughness across the plate.

Frequently Asked Questions

What is P335GH boiler steel plate?

P335GH is a non-alloy steel for pressure equipment manufactured according to EN 10028-2. It has good welding performance and mechanical properties, and is suitable for pressure vessels, boilers, and other structural parts that must withstand pressure.

What is the yield strength of P335GH?

The minimum yield strength is 335 MPa for plates up to 16 mm thick. The value decreases with thickness to 280 MPa for plates from 150 to 250 mm, in accordance with EN 10028-2.

What is the chemical composition of P335GH?

The main elements are carbon 0.10 to 0.22%, silicon 0.60% maximum, manganese 1.10 to 1.70%, phosphorus 0.025% maximum, and sulfur 0.010% maximum, with total aluminum at least 0.020% for fine grain practice.

Is P335GH suitable for welding?

Yes. P335GH has good welding performance and can be fabricated with conventional arc welding processes, with procedures qualified for the plate thickness and restraint conditions.

What are the main applications of P335GH?

The grade is used for pressure vessels such as storage tanks and reactors, boiler pressure parts, pipelines transporting high-temperature and high-pressure media, and structural parts in chemical equipment.

What is the elongation requirement for P335GH?

The minimum elongation is 20% in a 50 mm gauge length, measured in accordance with EN 10028-2, which ensures sufficient ductility for forming and pressure service.

Send Inquiry