W10x88, W10x100, and W10x112 are American standard wide flange H-beams that belong to the same nominal depth class. In the designation, W identifies the wide flange shape, 10 is the nominal depth of about 10 inches, and the number after x is the unit weight in pounds per foot. The three sizes are selected for different load levels and are commonly supplied in A36, A572 Grade 50, or A992 steel.
What the Designations Mean
All three beams have a nominal depth of about 10 inches, approximately 254 mm, and they differ mainly in flange thickness, web thickness, and weight. W10x88 weighs 88 pounds per foot, about 131 kg per meter; W10x100 weighs 100 pounds per foot, about 149 kg per meter; and W10x112 weighs 112 pounds per foot, about 167 kg per meter. The heavier members have thicker flanges and webs, which give them higher moment capacity and stiffness for the same depth.
Material Grades
A36 is a basic carbon structural steel with a minimum yield strength of 36 ksi, about 250 MPa, and is the economical choice for general framing. A572 Grade 50 is a high-strength low-alloy steel with a minimum yield strength of 50 ksi, about 345 MPa, which allows lighter sections for the same load. A992 is the preferred specification for wide flange shapes, with a yield strength of 50 to 65 ksi, about 345 to 450 MPa, and additional requirements for weldability and toughness in modern building and bridge construction.
W10x88: Medium to Heavy Loads
W10x88 is suitable for applications with medium to heavy loads, such as main load-bearing members in heavy industrial plants and multi-story buildings. It provides a good balance of capacity and weight, and it is often used for columns and beams where the design does not require the full capacity of the heavier members in the series.
W10x100: Higher Load and Stiffness
W10x100 is selected where the requirements for load-carrying capacity and rigidity are higher, such as large industrial facilities and core supports of high-rise buildings. The additional flange and web material increase both the section modulus and the stiffness, which helps control deflection and stability in taller or more heavily loaded frames.
W10x112: Extreme Loads and Long Spans
W10x112 is particularly suitable for extreme load conditions or long-span structures, such as large warehouses, gymnasiums, and exhibition centers, where great strength and stability are required. Its higher weight and section properties provide the bending and compression capacity needed for long clear spans and heavy equipment support.
Frequently Asked Questions
What does W10x88 mean? W is the wide flange shape, 10 is the nominal depth in inches, and 88 is the unit weight of 88 pounds per foot, about 131 kg per meter.
Which is heavier, W10x100 or W10x112? W10x112 is heavier at about 167 kg per meter, versus about 149 kg per meter for W10x100.
What steel grades are available for the W10 series? The common grades are A36, A572 Grade 50, and A992, depending on the strength and toughness requirements.
What is the yield strength of A992 steel? 992 has a minimum yield strength of 50 ksi, about 345 MPa, with typical values up to 65 ksi.
Where is W10x112 used? In extreme-load and long-span structures such as large warehouses, gymnasiums, and exhibition centers.
Can these beams be welded? Yes, all three grades are weldable; A992 is preferred for wide flange shapes because of its controlled weldability and toughness.

