Knowledge

Why choose S690Q material?

Jan 15, 2026 Leave a message

S690Q is a high-yield strength, quenched and tempered (Q+T) structural steel grade (EN 10025-6) known for its exceptional strength, toughness, and fatigue resistance, featuring a minimum yield strength of 690 MPa, making it ideal for heavy-duty applications like cranes, bridges, mining equipment, and offshore structures where high strength-to-weight ratio is crucial for safety and performance.

info-476-384

Chemical composition of S690Q steel according EN 10025-6, %

С

Si

Mn

P

S

N

B

Cr

Cu

Mo

Nb

Ni

Ti

V

Zr

0,20

0,80

1,70

0,025

0,015

0,015

0,005

1,50

0,50

0,70

0,06

2,0

0,05

0,12

0,15

 

Mechanical properties of S690Q steel

Nominal gauge, mm

Minimum yield strength, ReH (MPa)

Ultimate tensile strength, Rm (MPa)

Minimum elongation ratio σ, %

Brinell hardness number, HB (MPa)

> 3 ≤ 50

690

770-940

14

228-278

> 50 ≤ 100

650

760-930

14

225-276

> 100 ≤ 150

630

710-900

14

210-266

 

Analogues to S690Q steel

Germany (DIN)

StE690V

France (AFNOR)

E690T

 

info-507-250

Workflow

1. Pre-Processing & Cutting

Because S690Q is sensitive to high heat, cutting methods must minimize thermal deformation and the size of the heat-affected zone (HAZ).

Methods:

Laser & Plasma Cutting: Preferred for high precision and smaller HAZ.

Oxy-fuel Cutting: Often used for thicker plates (typically >50mm), though it creates a larger HAZ and may require edge trimming.

Edge Preparation: Beveling (V, X, or K-shaped) is essential for full-penetration welding. Surfaces should be cleaned of rust, scale, and oil at least 25–50 mm from the joint.

2. Cold & Hot Forming

Cold Forming: S690Q is suitable for cold bending and rolling; however, due to its high strength, higher press forces and greater springback must be accounted for.

Hot Forming: Generally discouraged above the tempering temperature (typically 530°C–600°C) as it may permanently reduce the material's strength.

3. Welding Procedure

Welding is the most critical phase where the material's properties can be compromised if heat input is not controlled.

Preheating: Necessary for thicker sections to prevent hydrogen-induced cracking.

6–20 mm: 75–100°C

20–50 mm: 100–150°C

Heat Input: Must be kept to a practical minimum (often limited to ~4 kJ/cm) to prevent grain growth in the HAZ.

Consumables: Use low-hydrogen filler metals (e.g., AWS E11018-G) that match or slightly exceed the base metal's strength.

4. Post-Processing & Inspection

Post-Weld Heat Treatment (PWHT): S690Q often does not require PWHT. If stress-relief annealing is mandatory for construction reasons, it should be done 30–40°C below the original tempering temperature (typically in the 530–580°C range) to avoid loss of strength.

Inspection (NDT): Non-destructive testing (Ultrasonic, Magnetic Particle, or Radiographic) is required to detect surface or internal cracks, especially near the HAZ.

 

info-274-376

applications

• Heavy lifting equipment:

S690Q is commonly used in the manufacturing of cranes, mobile lifting platforms, and hydraulic lifting arms. Its high yield strength allows for the design of lighter, more efficient structures without compromising load‑bearing capacity, making it ideal for equipment that needs to handle heavy weights while maintaining maneuverability.

• High‑rise and large‑span buildings:

In the construction industry, S690Q is used for critical structural components such as columns, beams, and trusses in high‑rise buildings and large‑span structures. Its ability to withstand extreme loads and resist deformation helps enhance the overall stability and safety of modern buildings, especially in seismic‑prone regions.

• Offshore and marine structures:

Due to its good toughness and resistance to harsh environmental conditions, S690Q is employed in offshore platforms, support structures, and marine equipment. It provides reliable performance under high stress and corrosive marine environments, contributing to the structural integrity of offshore installations.

• Mining and construction machinery:

S690Q is used in the production of heavy machinery such as excavator booms, bulldozer blades, and mining truck components. Its combination of strength and toughness helps these machines withstand the abrasive and high‑impact conditions typical of mining and construction sites.

• Bridge structures:

For bridges that require high load capacity and long‑term durability, S690Q is used in critical parts such as bridge girders and support members. Its high strength allows for reduced material thickness, leading to more economical and efficient designs.

 

Contact now

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

 

 

 

What is the microstructure of S690Q?

S690Q has a tempered martensitic microstructure. This structure is formed by quenching and tempering, providing its high strength and toughness.

 

What are the common thickness ranges of S690Q plates?

S690Q plates are commonly available in thicknesses from 3 mm to 150 mm. Thicker plates may require adjusted heat treatment for uniform properties.

 

What is the maximum operating temperature for S690Q?

The maximum safe operating temperature for S690Q is around 200°C. Beyond this, its mechanical properties may gradually degrade.

 

Can S690Q be used in low-temperature environments?

Yes. S690Q has good low-temperature toughness, with a minimum impact test temperature of -20°C (for Q grade), suitable for cold regions.

 

What are the main alloying elements in S690Q?

Key alloying elements in S690Q include carbon, manganese, chromium, molybdenum, and nickel. They enhance strength, toughness, and hardenability.

 

How is S690Q heat-treated?

S690Q undergoes quenching (rapid cooling from austenitizing temperature) followed by tempering. This process optimizes its strength and ductility.

 

How to store S690Q plates to prevent corrosion?

Store S690Q plates in a dry, well-ventilated area, away from moisture and chemicals. Cover with waterproof sheets to avoid rusting.

 

Can S690Q be nitrided?

Yes, S690Q can be nitrided to improve surface hardness and wear resistance. This process enhances its performance in wear-prone applications.

 

What is the elongation at break of S690Q?

The minimum elongation at break of S690Q is 14% (for 16 mm thickness). It ensures sufficient ductility for structural safety.

 

Is S690Q suitable for crane booms?

Yes, S690Q is ideal for crane booms. Its high strength reduces weight while maintaining load-bearing capacity, improving crane efficiency.

 

What are the inspection methods for S690Q?

Common inspection methods include tensile testing, impact testing, hardness testing, ultrasonic testing, and visual inspection to ensure quality.

 

Send Inquiry