Knowledge

Why choose Astm A537 Class 2 ?

Jan 05, 2026 Leave a message

Astm A537 Class 2 Steel Plate is designed with a chemical composition of carbon, silicon, manganese, phosphorus sulfur, chromium, molybdenum, nickel, and copper. The Astm A537 Class 2 Material is tempered and quenched to give them enhanced strength and excellent tolerances across stress-induced systems.

info-488-182

Chemical Composition of ASTM A537 Class 2

Element

Composition (%)

Carbon (C)

0.24 max

Manganese (Mn)

0.70-1.35 (≤40mm thickness) 1.00-1.60 (>40mm thickness)

Phosphorus (P)

0.035 max

Sulfur (S)

0.035 max

Silicon (Si)

0.15-0.50

Copper (Cu)

0.35 max (if specified)

Nickel (Ni)

0.25 max (if specified)

Chromium (Cr)

0.25 max (if specified)

Molybdenum (Mo)

0.08 max (if specified)

 

Mechanical Properties of ASTM A537 Class 2

Property

Value

Tensile Strength

80-100 ksi (550-690 MPa)

Yield Strength

60 ksi (415 MPa) min (≤65mm) 55 ksi (380 MPa) min (>65-100mm) 46 ksi (315 MPa) min (>100-150mm)

Elongation (in 50mm)

22% min (≤100mm) 20% min (>100mm)

Reduction in Area

Not specified, typically high

 

info-354-452

Applications: 

LNG storage tanks and cryogenic transport vessels.

Offshore platforms and Arctic pipelines.

High-pressure reactors in oil refineries.

Contact now

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

 

1.What is ASTM A537 Class 2 material?

ASTM A537 Class 2 is a quenched and tempered carbon-manganese-silicon steel plate for pressure vessels and boilers, offering high yield strength (60 ksi min) and tensile (80-100 ksi). It's heat-treated for superior toughness in high-pressure, low-temperature, or sour service environments, compliant with NACE when tested. Equivalent to ASME SA537 Class 2, it's used in demanding applications like reactors and tanks, allowing thinner designs for cost efficiency.

 

2.What is the difference between A537 Class 1 and Class 2?

A537 Class 1 is normalized (yield 50 ksi min), suitable for standard services with good weldability. A537 Class 2 is quenched and tempered (yield 60 ksi min), providing higher strength for extreme pressures or temperatures, with better impact resistance. Class 2 requires careful welding to avoid cracking due to hardness, but it reduces material thickness, saving costs. astm a537 class 2 mechanical properties overview shows its edge in sour gas applications.

 

3.What applications suit A537 Class 2 plates?

A537 Class 2 suits high-stress uses in oil/gas (sour separators), petrochemicals (reactors), and power (steam boilers). It's ideal for cryogenic tanks or vessels under cyclic loading, with HIC resistance for corrosive fluids. Offshore platforms and heat exchangers benefit from its toughness. Unlike Class 1, it's preferred for elevated temperatures up to 600°C, extending lifespan in harsh conditions.

 

4.s A537 Class 2 equivalent to SA537 Class 2?

Yes, A537 Class 2 is equivalent to ASME SA537 Class 2, with identical composition (carbon 0.24% max) and properties (yield 60 ksi min). ASTM A537 is the material spec, while SA537 ensures ASME code compliance like Section VIII. International equivalents include EN P460NH and JIS SPV490; verify for projects.

Send Inquiry