What standards cover S890Q steel?

S890Q is a European grade of high-yield-strength structural steel defined under the EN 10025-6 standard. It is a quenched (Q) and tempered (T) steel designed for high-load applications where weight reduction and high strength are critical.
1. Key Specifications
Material Number: 1.8940.
Yield Strength: Minimum 890 MPa (for nominal thicknesses up to 50mm).
Tensile Strength: Typically ranges between 940–1100 MPa.
Impact Testing: S890Q specifically requires a minimum impact energy value at temperatures not lower than -20°C. (Note: Variants like S890QL and S890QL1 are tested at -40°C and -60°C, respectively).
2. Common Applications
Due to its high strength-to-weight ratio, S890Q is used in safety-critical and heavy-duty industrial sectors:
Lifting & Earthmoving: Booms for mobile cranes, dumper bodies, and chassis for heavy road vehicles.
Structural Engineering: Bridge components, offshore structures, and supporting frameworks.
Energy & Pressure Vessels: Penstocks, spiral cases for power plants, and fixed or transportable storage tanks.
3. Manufacturing & Fabrication
Delivery Condition: Water quenched and tempered (+QT) to achieve a fine-grained microstructure of bainite and tempered martensite.
Workability: Despite its high strength, it is weldable and suitable for bolted or riveted structures.
Thermal Cutting: Research indicates that while traditional flame cutting is common, laser and plasma cutting methods can improve the fatigue life of the cut edges.

S890Q steel is primarily defined and governed by the European standard EN 10025-6, which specifically covers quenched and tempered high-strength structural steels. This standard outlines the mandatory requirements for chemical composition, mechanical properties, testing methods, and delivery conditions.
Here are the key standards and specifications applicable to S890Q:
1. Primary Material Standard
EN 10025-6: Hot rolled products of structural steels – Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition.
This is the core standard that defines the grade "S890Q," including its sub-grades (e.g., S890QL for low-temperature toughness).
It specifies minimum yield strength (890 MPa), tensile strength, elongation, and impact toughness requirements (e.g., Charpy V-notch values at -40°C for S890QL).
2. Complementary Testing & Certification Standards
EN 10204: Defines inspection documents. For S890Q, a Type 3.1 Certificate (verified by the manufacturer's independent inspection department) is typically mandatory.
EN ISO 148-1: Charpy pendulum impact test method.
EN ISO 6892-1: Tensile test method.
EN ISO 6506-1: Brinell hardness test method.
3. Design & Fabrication Standards (Application-Specific)
These standards guide how S890Q is used in engineering projects:
EN 1993-1-10 (Eurocode 3): Provides rules for selecting steel grades based on toughness requirements, considering factors like temperature, stress, and thickness.
EN 1993-1-12: Extended Eurocode rules for steels up to S700 (S890Q may require special approval or performance-based design).
EN ISO 15614-1: Qualification of welding procedures.
EN 1011-2: Recommendations for welding of steel.
4. Equivalent or Related Standards in Other Regions
ISO 4950-3: May include similar high-strength quenched and tempered steels, but EN 10025-6 is the dominant specification for S890Q in international markets.
ASTM A514 / A517 (USA): These are quenched and tempered alloy steel plates with similar strength levels (~690–890 MPa yield), but there is no direct ASTM equivalent that exactly matches the "S890Q" classification and its sub-grades. A517 Grade 100 would be a rough functional equivalent in strength.
5. Industry-Specific Standards
For specialized applications, additional standards may apply:
Offshore: DNVGL, EN 10225, or API standards.
Cranes: EN 13001, FEM, or ISO 8686.
Pressure Equipment: EN 10028 (though S890Q is not commonly used for pressure vessels due to toughness constraints).
Summary:
To specify or procure S890Q, the minimum requirement is to reference EN 10025-6 along with the required sub-grade (e.g., S890QL for -40°C impact toughness). Certification (EN 10204 Type 3.1) is essential. For engineering projects, compliance with relevant design codes (e.g., Eurocode) and welding standards ensures safe and reliable application. Always confirm the exact standard with the supplier or project specifications.
What is S890Q steel?
S890Q is a very high-strength quenched and tempered structural steel with a minimum yield strength of 890 MPa, designed for extreme load-bearing applications.
What are the properties of S890Q steel?
It offers exceptional strength, good toughness at low temperatures, and weldability with proper procedures, though it is more brittle than lower-grade steels.
Where is S890Q steel used?
S890Q is used in heavy-duty crane booms, advanced mining equipment, high-performance military vehicles, and specialized structural components where maximum strength-to-weight ratio is critical.
How does S890Q compare to S690Q?
S890Q has a higher yield strength (890 MPa vs. 690 MPa) but lower toughness and weldability, making it suitable for more demanding, lightweight designs.
What welding procedures are required for S890Q?
Welding S890Q requires strict preheating (often 150-200°C), low-hydrogen electrodes, controlled heat input, and post-weld stress relief to avoid cracking.
Is S890Q steel corrosion resistant?
No, S890Q is not corrosion-resistant and requires protective coatings like painting or galvanizing for use in exposed environments.
What standards cover S890Q steel?
It is primarily specified under the European standard EN 10025-6 for quenched and tempered high-strength structural steels.
Can S890Q be machined easily?
Machining S890Q is difficult due to its extreme hardness and strength; it requires robust tooling, slow speeds, and ample cooling.
What is the price of S890Q steel plate?
S890Q is significantly more expensive than lower-strength grades, with prices varying based on thickness, quantity, and certification requirements.
Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.


