Tungsten alloys, and in particular tungsten heavy alloys of the W-Ni-Fe and W-Ni-Cu types, are powder-metallurgy products that combine the very high density of tungsten with the ductility and machinability provided by the nickel-iron or nickel-copper binder phase. They are used where mass concentration, radiation attenuation, or wear resistance in a small volume is required, such as counterweights, radiation shielding, and electrodes. The following sections summarize their principal engineering properties.
What Is Tungsten Alloy?
Tungsten heavy alloy is produced by mixing tungsten powder with a small percentage of nickel, iron, or copper, pressing the blend into shape, and sintering at high temperature. The result is a dense, essentially fully consolidated material with a tungsten content typically in the range of 90-97%. The binder phase surrounds the tungsten grains, providing ductility that pure sintered tungsten lacks. The most common systems are W-Ni-Fe, used for mechanical and shielding applications, and W-Ni-Cu, selected where non-magnetic behavior is required.
High Density and Radiation Shielding
The density of tungsten alloy is generally 16.5-19.0 g/cm3, which is equivalent to more than twice the density of steel. Tungsten alloy sheet can reach about 18.8 g/cm3, higher than lead, and its X-ray and gamma-ray absorption capacity is correspondingly better than that of lead plate. This makes tungsten alloy the material of choice for compact radiation shielding, collimators, and containers where a given attenuation must be achieved in a smaller volume or with less mass than lead would allow. The high density also makes tungsten alloy effective for kinetic-energy components and vibration-damping counterweights.
Mechanical Properties
Sintered W-Ni-Fe high-density alloy has a tensile strength of 800-1000 MPa, and the strength can be increased to 1300-1500 MPa after heat treatment and deformation processing such as swaging or forging. The alloy has good ductility in the sintered state, with elongation of about 10-15%, and after vacuum or atmosphere dehydrogenation treatment the elongation can be increased to 20-30%. This combination of high strength and useful ductility distinguishes tungsten heavy alloys from brittle pure tungsten and allows them to carry mechanical loads in service.
Physical and Electrical Properties
The linear thermal expansion coefficient of tungsten alloy is only about one half to one third of that of iron or steel, which reduces thermal distortion in applications with temperature changes. W-Ni-Cu and W-Ni-Fe high-density alloys also have good electrical conductivity, electric corrosion resistance, high voltage resistance, and other electrical properties, which suit them for electrical contacts, electrodes, and arc-resistance components. The low expansion and good thermal conductivity contribute to dimensional stability in precision components.
Wear Resistance and Machinability
Tungsten alloy is wear-resistant and corrosion-resistant, and with improved storage and protection technology its service life in demanding applications has been extended. Because W-Ni-Fe high-density alloy has good ductility, it can be processed by conventional machining operations such as turning, milling, planing, threading, and tapping, as well as by rolling, swaging, and forging. The same large deformation strengthening treatment that raises the tensile strength also improves the mechanical properties of finished components, allowing the material to be tailored to the application.
Frequently Asked Questions
What is tungsten heavy alloy? Tungsten heavy alloy is a powder-metallurgy composite of tungsten with a nickel-iron or nickel-copper binder, typically 90-97% tungsten, combining very high density with ductility and machinability.
Why is tungsten alloy so dense? The density of tungsten alloy is generally 16.5-19.0 g/cm3, more than twice that of steel, because it consists mostly of tungsten, which is among the densest of the common metals.
What is the tensile strength of tungsten alloy? The tensile strength of sintered W-Ni-Fe high-density alloy is 800-1000 MPa, and it can be increased to 1300-1500 MPa after heat treatment and deformation processing.
Can tungsten alloy be machined? Yes. Because of its ductility, W-Ni-Fe alloy can be machined by turning, milling, planing, threading, and tapping, and formed by rolling, swaging, and forging. Carbide tooling is typically used because of the material hardness.
How does tungsten alloy compare with lead for radiation shielding? Tungsten alloy is denser than lead, up to about 18.8 g/cm3, and provides better X-ray and gamma-ray absorption for the same thickness, allowing smaller, lighter shielding components.
What are typical uses of tungsten alloy? Typical uses include counterweights and balance masses, radiation shielding and collimators, electrical contacts and electrodes, kinetic-energy penetrators, and wear-resistant or high-temperature tooling components.

