Products Description
S690 steel is known for its high yield strength, typically ranging from 690 MPa to 960 MPa, which allows for thinner sections in structural applications without compromising strength.

This characteristic not only reduces the weight of structures but also leads to cost savings in materials and transportation. The steel exhibits good toughness and ductility, which are critical for applications subjected to dynamic loads.
Advantages of S690 Steel
- High Strength-to-Weight Ratio: Enables the design of lighter structures.
- Excellent Weldability: Suitable for various welding processes, facilitating fabrication.
- Good Toughness: Maintains performance in low-temperature environments.
Limitations of S690 Steel
- Cost: Higher than conventional structural steels due to alloying elements.
- Brittleness at Low Temperatures: Requires careful consideration in cold environments.
- Limited Corrosion Resistance: May require protective coatings in aggressive environments.
EN 10025-6 S690QL steel chemical composition
| EN 10025-6 | C | Si | Mn | P | S | N | B | Cr |
| S690QL | 0.20 | 0.80 | 1.70 | 0.025 | 0.015 | 0.015 | 0.005 | 1.50 |
| Cu | Mo | Nb | Ni | Ti | V | Zr | ||
| 0.50 | 0.70 | 0.06 | 2.0 | 0.05 | 0.12 | 0.15 |
EN 10025-6 S690QL equivalent ASTM steel A709 grade 100 chemical composition
| ASTM A709 | C max | Si max | Mn | P max | S max | Cu min | V max | Nb | Ni max | Cr max | Mo max | Al min | N |
| A709 grade 100 | 0.26 | 0.4 | 0.4-0.9 | 0.04 | 0.05 |
EN 10025-6 S690QL steel mechanical property
| Designation | Mechanical Properties (ambient temperature) | |||||||
| Grade | Steel Number |
Min. Yield Strength Reh MPa | Tensile Strength Rm MPa | Min. % elongation after fracture |
||||
| Nominal thickness (mm) | Nominal thickness (mm) | |||||||
| ≥3 ≤50 | ≥50 ≤100 | ≥100 ≤150 | ≥3 ≤50 | ≥50 ≤100 | ≥100 ≤150 | |||
| S690QL | 1.8928 | 690 | 650 | 630 | 770/940 | 760/930 | 710/900 | 14 |
EN 10025-6 S690QL equivalent ASTM steel A709 grade 100 mechanical property
| ASTM A709 | Yield Strength (MPa) min. |
Tensile Strength (MPa) min. |
Elongation in 8 in. min. % |
Elongation in 2 in. min. % |
| A709 grade 100 | 690 | 760-895 | - | 18 |


