
SA 302 Grade B is a low‑alloy pressure vessel steel plate specified under the ASME SA‑302 standard. It is designed for use in boilers, pressure vessels, and other equipment that operate under high temperatures and pressures. The steel contains manganese, molybdenum, and nickel, which contribute to its high strength, good toughness, and resistance to creep and hydrogen attack. It is typically supplied in the normalized or normalized and tempered condition, depending on thickness, and is known for maintaining reliable performance in both elevated and moderately low‑temperature environments.
|
SA302 Grade B Chemical Composition |
|||||||
|
Carbon, max |
% |
Manganese, max |
% |
Silicon, max |
% |
Sulfur max |
% |
|
25mm or under |
0.2 |
Heat Analysis |
1.15-1.50 |
Heat Analysis |
0.15-0.40 |
All thick |
0.035 |
|
25-50mm |
0.23 |
Product Analysis |
1.07-1.62 |
Product Analysis |
0.13-0.45 |
||
|
over 50mm |
0.25 |
|
|
|
|
||
|
|
|
Molybdenum max |
% |
Nickel max |
% |
Phosphorus |
% |
|
|
|
Heat Analysis |
0.45-0.60 |
Heat Analysis |
… |
All thick |
0.035 |
|
|
|
Product Analysis |
0.41-0.64 |
Product Analysis |
… |
||
|
Mechanical Property of SA302 Grade B steel plate |
SA302 Grade B |
|
Tensile strength, kis [MPa] |
80-100 [550-690] |
|
Yield strength, min, kis [MPa] |
50 [345] |
|
Elongation in 8 in. [200 mm], min, % |
15 |
|
Elongation in 2 in. [50 mm], min, % |
18 |
processing
1. Heat Treatment (Delivery Status)
The heat treatment for SA-302 Gr.B depends on plate thickness and requirements. Standard conditions are typically Normalized (N) or Normalized and Tempered (N+T). For plates over 50 mm (2 in.), normalizing is required. Stress Relieved (SR) or Simulated Post-Weld Heat Treatment (PWHT) are also options.
2. Mechanical Properties
The material must meet ASME/ASTM specifications, including:
Tensile Strength: 550 – 690 MPa (80 – 100 ksi).
Yield Strength: Minimum 345 MPa (50 ksi).
Elongation: Minimum 15% (in 200 mm) or 18% (in 50 mm).
Impact Testing: Often requires a Charpy V-Notch Impact Test at specific temperatures.
3. Fabrication & Processing
Welding: SA-302 Gr.B is intended for welding. Preheating and post-weld heat treatments are typically needed.
Cutting & Forming: Standard methods like gas/plasma cutting and shearing can be used. Forging is recommended between 1149°C and 1260°C.
Supplementary Requirements: Additional tests for severe service may include:
Ultrasonic Testing (UT): To detect internal flaws.
Z-Direction Testing: To assess resistance to lamellar tearing.
HIC/SSCC Testing: For resistance in sour service, per NACE MR0175.
4. Technical Comparison
SA-302 Gr.B is often compared to Chinese 15CrMoR (GB/T 713).
Applications
Petrochemical Industry: Reactors, storage tanks, separators, and hydrogenation units in refineries.
Power Generation: Boilers, steam drums, heat exchangers, and pressure shells for nuclear reactors.
Energy Sector: Equipment for oil and gas storage, liquefied petroleum gas (LPG) vessels, and high-pressure water pipes for hydroelectric plants.
General Pressure Vessels: Bodies, shells, and components requiring high strength and temperature resistance.
Advantages
High Strength & Toughness: Offers high tensile strength and excellent low-temperature impact toughness, suitable for harsh conditions.
Improved Weldability: Its low alloy content simplifies welding, improving efficiency and structural integrity.
Corrosion Resistance: Exhibits good resistance to high-temperature hydrogen corrosion, crucial in refinery applications.
Controlled Properties: Manufactured with controlled rolling and cooling for refined microstructure and uniform mechanical properties.
Reliability: Meets stringent ASME standards for pressure vessel construction, ensuring long-term safe operation.
For more details about GNEE's steel products, contact us at beam@gneesteelgroup.com. We look forward to working with you.
What is SA‑302 Grade B?
SA‑302 Grade B is a pressure vessel steel plate under the ASME standard, designed for high‑temperature service. It is a manganese‑molybdenum alloy steel offering good strength and toughness. The grade is used in boilers, pressure vessels, and structural components where elevated temperatures and moderate corrosion resistance are required. Its composition and heat treatment ensure reliable performance under stress.
What are the key chemical components of SA‑302 Grade B?
SA‑302 Grade B primarily consists of manganese and molybdenum as main alloying elements, along with carbon, silicon, and small amounts of phosphorus and sulfur. These elements enhance hardenability, strength, and high‑temperature stability. The controlled chemistry ensures weldability and resistance to creep, making it suitable for pressure vessel applications.
What is the typical tensile strength of SA‑302 Grade B?
SA‑302 Grade B has a tensile strength ranging from approximately 65 to 85 ksi (450 to 585 MPa). This strength level provides sufficient load‑bearing capacity for high‑temperature pressure vessel service. The material maintains its strength at elevated temperatures, which is critical for applications such as boiler drums and heat exchangers.
What is the minimum yield strength of SA‑302 Grade B?
The minimum yield strength of SA‑302 Grade B is 35 ksi (240 MPa). This yield strength ensures that the material can withstand significant pressure and stress without permanent deformation. It is a key parameter for pressure vessel design, ensuring safety and structural integrity under both normal and extreme operating conditions.
What is the maximum temperature SA‑302 Grade B can withstand?
SA‑302 Grade B is typically used at temperatures up to around 650°F (345°C). At these temperatures, it retains adequate strength and creep resistance. Beyond this range, its mechanical properties may degrade, so it is not recommended for higher‑temperature service unless specifically evaluated.
Is SA‑302 Grade B weldable?
Yes, SA‑302 Grade B is generally considered weldable using common welding processes such as SMAW, GMAW, and SAW. Proper preheating and interpass temperature control are necessary to prevent cracking, especially in thicker sections. Post‑weld heat treatment may also be applied to improve toughness and reduce residual stress.
What heat treatment is required for SA‑302 Grade B?
SA‑302 Grade B is usually supplied in the normalized condition, which refines the grain structure and improves toughness. Some applications may require quenching and tempering for higher strength, but normalization is the standard treatment. The heat treatment ensures consistent mechanical properties across the plate thickness.
What are the common applications of SA‑302 Grade B?
SA‑302 Grade B is widely used in pressure vessels, boilers, and storage tanks that operate at moderate to high temperatures. It is also found in heat exchangers, boiler drums, and piping components. Its combination of strength, toughness, and weldability makes it suitable for various industrial sectors, including power generation and petrochemical processing.
How does SA‑302 Grade B differ from SA‑302 Grade A?
SA‑302 Grade B has higher manganese and molybdenum content than Grade A, resulting in greater strength and improved high‑temperature performance. Grade B is preferred for more demanding pressure vessel applications where higher stress or temperature resistance is needed. Grade A is simpler and used in less severe conditions.


