Knowledge

What Is S690 Steel? Properties, Standards, and Applications

Dec 22, 2025 Leave a message

S690 steel is a high-yield structural steel classified in the European standard EN 10025-6, which covers flat and long products for structural purposes supplied in the quenched and tempered condition. The designation S690 refers to the minimum yield strength of 690 MPa for the thinner thickness range. The grade is primarily characterized by its high strength and excellent weldability, which make it suitable for demanding applications in construction, mining, and offshore engineering.

What S690 Steel Is

S690 belongs to a family of high-strength structural steels whose properties are developed by quenching and tempering rather than by heavy alloying alone. The main designations in the family are S690Q, S690QL, and S690QL1, which differ in the guaranteed Charpy impact temperature: S690Q is tested at -20 deg C, S690QL at -40 deg C, and S690QL1 at -60 deg C. The core alloying elements are carbon, manganese, and silicon, with small amounts of chromium, nickel, and molybdenum that enhance the mechanical properties and hardenability.

Advantages of S690 Steel

The main advantage of S690 is its high strength-to-weight ratio, which allows the design of lighter structures and smaller members for the same load. This reduces steel tonnage, foundation loads, and transportation and erection costs. The steel has excellent weldability when welded with a qualified procedure, and the L subgrades provide good toughness in low-temperature environments, which is important for Arctic and offshore service.

Limitations to Consider

S690 costs more than conventional structural steels such as S355 because of the alloying elements and the quenching and tempering treatment. At low temperatures, the correct subgrade must be selected, because toughness is guaranteed only down to the tested temperature of the chosen designation. The material has limited corrosion resistance in aggressive environments and may require protective coatings when exposed to severe atmospheric or chemical conditions.

Standards and Related Grades

The governing specification for S690 is EN 10025-6, and within the EN 10027-2 designation system S690QL is also identified by the material number 1.8928. Grades from other systems, such as ASTM A572 Grade 65, have a similar nominal strength level but different chemical composition and testing requirements, so substitution should always be confirmed by the design engineer. The performance of the steel is defined by the EN 10025-6 requirements rather than by equivalency tables between national systems.

Typical Applications

Heavy construction equipment and machine frames

Mining machinery, dumper bodies, and crusher structures

Mobile cranes, crane booms, and lifting equipment

Offshore structures and wind turbine support components

High-rise building columns and heavily loaded bridge members

Frequently Asked Questions

What is S690 steel? S690 is a high-yield structural steel to EN 10025-6 with a minimum yield strength of 690 MPa, supplied in the quenched and tempered condition.

What does the number 690 mean? It is the minimum yield strength in MPa guaranteed for the thinner thickness range of the grade.

What is the difference between S690Q, S690QL, and S690QL1? They differ in the guaranteed Charpy impact temperature, which is -20, -40, and -60 deg C respectively.

Is S690 steel weldable? Yes, S690 is weldable when a qualified procedure with controlled preheat, interpass temperature, and low-hydrogen consumables is used.

Why is S690 more expensive than S355? Because of the alloying elements and the quenching and tempering heat treatment required to reach the higher strength.

Where is S690 steel used? In heavy construction, mining equipment, cranes, offshore structures, and other applications where high strength reduces weight and cost.

Send Inquiry