Knowledge

What is Contents S550Q

Dec 23, 2025 Leave a message

S550Q is a kind of quenched and tempered low - alloy high - strength structural steel that complies with the European standard EN 10025 - 6, with its material number being 1.8904. Each letter and number in its grade has a specific meaning: "S" stands for structural steel, "550" indicates that its yield strength can reach 550MPa, and "Q" means it maintains good impact performance at -20℃. 

 

S550Q

Chemical Composition

 

 

The content of harmful impurities is strictly controlled. For example, the maximum allowable content of phosphorus is ≤0.025% and sulfur is ≤0.015%. It also contains multiple alloy elements such as manganese (≤1.70%), chromium (≤1.50%), and molybdenum (≤0.70%). These elements and their reasonable proportioning ensure the steel's high strength and toughness while improving its overall mechanical properties.

 

Mechanical Properties

 

 

Its mechanical properties vary slightly with thickness. For plates with a thickness of 3 - 50mm, the yield strength is 550MPa and the tensile strength ranges from 640 - 820MPa. When the thickness is 50 - 100mm, the yield strength drops to 530MPa, but the tensile strength remains the same. For plates over 100mm thick, the yield strength is 490MPa and the tensile strength is 590 - 770MPa. In addition, its elongation rate is not less than 16%, and the impact energy at -20℃ can reach 30J, and at 0℃ it can reach 40J.

 

Common Specifications and Delivery Status

 

 

 Its common thickness ranges from 8 - 280mm, width from 1600 - 4020mm, and length from 6000 - 17500mm. It is usually delivered after quenching and tempering. If customers have special needs, they can also negotiate with suppliers to add flaw detection, Z-direction performance and other requirements, which need to be specified in the contract.

 

 

Typical Applications

 

 

Thanks to its excellent high - strength and low - temperature impact performance, it is widely used in the manufacturing of key components requiring low - temperature resistance and high strength. It is a common material for hydropower stations and hydraulic turbines. Meanwhile, it is also applied in power transmission towers, oil derricks, port machinery, heavy - duty automobile structures and high - rise building load - bearing components.

 

 

Contact now

 

 

What welding methods and precautions are suitable for S550Q?

It is compatible with CO₂ gas shielded welding and arc welding. Pre-weld preparation requires cleaning 100mm of material around the weld to remove oil/rust. For plates >30mm or in environments <0°C, preheat to 80–100°C. Use low-hydrogen welding materials, control heat input, and perform post-weld hydrogen elimination to avoid heat-affected zone embrittlement .

 

How does S550Q differ from S550QL, and how to choose between them?

The core gap is low-temperature toughness: S550Q guarantees performance at -20°C, while S550QL (with "L") meets ≥30J impact energy at -40°C . Choose S550Q for temperate high-load scenarios like power towers and port machinery; opt for S550QL for frigid environments such as alpine bridges or cold-region mining equipment .

 

What are the typical application fields of S550Q, and why is it widely used?

It is prevalent in power transmission towers, oil derricks, heavy-duty vehicle structures, and high-rise building load-bearing components . Its 550MPa yield strength is 1.6x that of ordinary Q345 steel, enabling 20–30% material reduction in structural design. Combined with good weldability and -20°C toughness, it balances strength, weight savings, and safety .

 

Does S550Q have equivalent grades in Chinese standards, and what are the correlations?

Yes, it aligns with China's Q550D grade. Both have 550MPa-level yield strength, quenched-tempered delivery, and -20°C impact toughness requirements. The main difference lies in execution standards-S550Q follows EN 10025-6, while Q550D adheres to GB/T 16270, but their core mechanical properties are interchangeable for most projects .

 

How does S550Q's performance change with thickness, and what should be noted in application?

Yield strength decreases slightly with thickness: 550MPa (3–50mm), 530MPa (50–100mm), and 490MPa (100–150mm), but tensile strength and toughness remain stable . For thick plates (>100mm), select Z-direction performance grades (Z15/Z25) to avoid layer tearing in multi-layer welding, and strengthen post-weld inspection .

Send Inquiry