What Is A573 Grade 58
ASTM A573 Grade 58 is a structural quality carbon-manganese-silicon steel plate specified in ASTM A573/A573M, covering plates in three tensile strength ranges, Grades 58, 65, and 70. Grade 58 is intended primarily for service at atmospheric temperatures where improved notch toughness is important, making it a reliable choice for welded structures subject to impact and fatigue.
Mechanical Properties
Grade 58 has a minimum yield point of 220 MPa, equivalent to 32 ksi, and a tensile strength of 400 to 490 MPa, equivalent to 58 to 71 ksi, with a minimum elongation of 21 percent in 200 mm. The improved toughness relative to ordinary carbon steels reduces the risk of brittle fracture in welded construction.
Chemical Composition
The limits are carbon 0.23 percent maximum, manganese 0.60 to 0.90 percent, phosphorus 0.030 percent maximum, sulfur 0.030 percent maximum, and silicon 0.10 to 0.35 percent. The steel is produced by open hearth, basic oxygen, or electric furnace processes, and supplied in the hot-rolled condition with mill test reports confirming properties.
Production Sizes
Plates are produced in thicknesses from 4 to 400 mm, widths from 1000 to 4000 mm, and lengths from 4000 to 12000 mm, supporting both plate fabrication and heavy machinery applications. Normalizing can be specified to refine the microstructure and further improve toughness.
Applications
A573 Grade 58 is used in petrochemical equipment such as reactors, heat exchangers, and spherical tanks; boiler drums and high-pressure pipelines in the energy sector; crane girders and bridge structures where notch toughness controls fatigue performance; pressure vessel storage tanks and separators; and rail transit, architectural support, and automotive applications where a balance of strength and toughness is required.
Selection Notes
Select the grade within A573 by the required tensile range and toughness level: Grade 58 for moderate strength with best formability, Grade 65 and Grade 70 for higher strength with correspondingly lower elongation. Confirm impact test requirements with the applicable design code.
Frequently Asked Questions
Q: What is the yield strength of A573 Grade 58?
A: 220 MPa minimum, equivalent to 32 ksi.
Q: What is the tensile strength of Grade 58?
A: 400 to 490 MPa.
Q: What makes A573 different from ordinary carbon steel?
A: Improved notch toughness for atmospheric temperature welded service.
Q: What applications use A573 Grade 58?
A: Petrochemical equipment, boiler drums, crane girders, bridges, and storage tanks.
Q: What sizes are available?
A: Thicknesses from 4 to 400 mm, widths to 4000 mm, and lengths to 12000 mm.
Q: How is A573 Grade 58 produced?
A: By open hearth, basic oxygen, or electric furnace processes in the hot-rolled condition.
Contact us for A573 Grade 58 plates with mill test certificates, normalized options, and cutting services.

