S690QL is an ultra-high-strength, quenched-and-tempered structural steel (EN 10025-6) with a minimum yield strength of 690 MPa, prized for its excellent strength-to-weight ratio, good weldability, and superior low-temperature toughness, making it ideal for lighter, more efficient heavy-duty applications like crane booms, heavy transport, bridges, and offshore structures where weight savings, durability, and performance under dynamic loads are critical.

Properties
High Strength: Minimum yield strength of 690 MPa, enabling lighter designs.
Excellent Toughness: Good impact resistance, especially at low temperatures (indicated by 'QL' for Quenched & Low temp).
Good Weldability: Can be welded with appropriate procedures, though careful handling is needed due to its high strength.
High Strength-to-Weight Ratio: Allows for significant weight reduction (15-30%) in structures compared to conventional steels like S355.
Ductility: Sufficient elongation (e.g., 14%) for fabrication.
Fatigue Resistance: Good resistance to cyclic loading and mechanical stress.
Applications
Lifting & Mobile Equipment: Crane booms, jibs, load-bearing components, earthmoving machinery (excavators, dump trucks).
Transportation: Heavy-duty truck frames, trailers, transport platforms, special vehicles, improving payload and fuel efficiency.
Construction: Bridges, heavy structural frames, columns, and beams for buildings and stadiums.
Offshore & Marine: Offshore oil rigs, platforms, shipbuilding, and components for drilling rigs.
Wind Energy: Structural parts for wind turbine towers.
Fabrication Considerations
Welding: Requires specific procedures to manage thermal stress and prevent cracking.
Forming: Possible with powerful machinery; bending limits apply (e.g., 2x thickness longitudinally, 3x transversely).
Machining: High strength can pose challenges, requiring specialized tools.
| Typical chemical composition of S690QL % Max | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
C |
SI |
Mn |
P |
S |
N |
B | Cr | Cu | Mo | Nb | Ni | Ti | V | Zr |
| 0.2 | 0.80 | 1.70 | 0.025 | 0.015 | 0.015 | 0.005 | 1.50 | 0.50 | 0.70 | 0.06 | 2.0 | 0.05 | 0.12 | 0.15 |
| Mechanical Properties of S690QL | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Designation | Mechanical Properties (ambient temperature) | ||||||||||
| Steel Name | Steel Number | Min. Yield Strength ReH MPa | Tensile Strength Rm MPa | Min. & elongation after fracture | |||||||
| Nominal thickness (mm) | Nominal thickness (mm) | ||||||||||
| >3 <50 | >50 <100 | >100 <150 | >3 <50 | >50 <100 | >100 <150 | ||||||
| S690QL | 1.8931 | 690 | 650 | 630 | 770/940 | 760/930 | 710/900 |
14 |
|||
What are the properties of 690ql?
S690QL is a high-strength quenched and tempered steel grade that meets the EN 10025 specification. The name S690QL stands for a minimum yield strength of 690 MPa. This steel is engineered to deliver high strength, toughness, wear resistance, and excellent weldability for demanding applications.
What is the difference between S690Q and S690ql?
S690Q: Minimum impact toughness tested at -20°C (30J average). → Typical Use: Cranes in temperate climates, quarry equipment. S690QL: Certified for -40°C and below (≥40J impact toughness). → Critical Use: Arctic pipelines, offshore platforms, mining vehicles in Siberia
What is S690 grade steel?
S690 high yield & fine grain steel plate is a high strength, quenched and tempered fine-grain structural steel. Structural steel S690 is used in structures that must withstand very heavy loads. This grade is meant for structures where weight savings is important.


