Knowledge

What are the properties and applications about A514 Grade E ?

Jan 06, 2026 Leave a message

What are the properties and applications of A514 Grade E ?

info-625-312

 

A514 Grade E is a high-strength, quenched and tempered alloy steel within the ASTM A514 specification, offering a minimum yield strength of 100 ksi (690 MPa). Its defining feature is enhanced atmospheric corrosion resistance (approximately twice that of carbon steel), achieved through a controlled chemistry with elevated Molybdenum content. This grade is designed for applications like unpainted outdoor machinery or structural components where both extreme strength and moderate environmental durability are required, bridging the gap between standard high-strength steel and full weathering grades.

 

1. Key Properties

A. Mechanical Properties (Primary)

Yield Strength (min): 100 ksi (690 MPa) – Ultra-high strength.

Tensile Strength: 115–135 ksi (790–930 MPa).

Elongation (min): ≥ 18% (in 2 inches) – Good ductility for its strength class.

Impact Toughness (mandatory): ≥ 40 ft·lb (54 J) at -40°F (-40°C) – Excellent low-temperature fracture resistance.

Hardness: Typically 235–293 HB.

B. Enhanced Corrosion Resistance (Defining Feature)

Mechanism: Achieved through elevated Molybdenum content (0.20–0.30%) in its chemistry.

Performance: Provides approximately twice the atmospheric corrosion resistance of plain carbon steel (e.g., A36). It forms a denser, more adherent rust layer than standard steel but does not develop the stable, self-protecting patina of true weathering steels (e.g., A588).

C. Metallurgical & Fabrication Properties

Process: Quenched & Tempered (Q&T) for uniform, fine-grained microstructure.

Weldability: Requires strict procedures: pre-heating (300–400°F/150–200°C), low-hydrogen electrodes, and often post-weld heat treatment (PWHT) due to high hardenability.

Formability: Limited cold forming; hot forming is preferred for severe bends.

 

2. Primary Applications

A514 Grade E is used in high-strength structural applications where moderate atmospheric exposure is expected, but a full weathering steel system is not required or justified.

A. Heavy Equipment for Outdoor Service

Mining/Construction: Excavator booms, shovel arms, and crane components that are stored or operate outdoors but may receive intermittent maintenance or repainting.

Agriculture: High-strength frames and components for large equipment exposed to weather.

B. Industrial Structures with Moderate Exposure

Unpainted or minimally maintained support frames, walkways, and platforms in industrial plants.

Material handling equipment like uncoated conveyor frames and stacking structures.

C. Specialized Transportation & Infrastructure

Heavy-haul trailer components and frames.

Non-bridge structural elements in environments where its enhanced corrosion resistance provides a lifespan benefit over standard Grade F.

D. Energy & Resource Sector

Land-based drilling rig components.

Support structures for renewable energy installations (excluding coastal/marine zones).

 

3. Application Boundaries: When NOT to Use A514 Grade E

ScenarioBetter Alternative
Fully unpainted, aesthetic exposure (e.g., architectural bridge)A709 Grade 100W (true weathering steel, code-listed for bridges)
Highly corrosive environments (coastal, chemical, constant moisture)Painted A514 Grade F + robust coating system or stainless/corrosion-resistant alloy
Cost-sensitive projects with no specific corrosion requirementA514 Grade F (same strength, lower cost, better availability)
Dynamic/fatigue-critical components where welding complexity must be minimizedA514 Grade F (same weldability, but one less variable)

 

4. Comparison with Key Alternatives

Property vs. AlternativeA514 Grade E AdvantageConsideration
vs. A514 Grade F2× better corrosion resistanceHigher cost, lower availability.
vs. A588 (50 ksi weathering)2× higher strengthLower corrosion resistance than A588.
vs. A709 Grade 100WSimilar strength; may be more available for non-bridge applications.Lower corrosion resistance; not code-listed for bridges.

 

Summary

A514 Grade E is a niche, high-performance steel that combines 100 ksi strength with moderate atmospheric corrosion resistance. It is optimally specified when:

1.1Ultra-high strength is non-negotiable,

2.The component will face outdoor exposure,

3.A full weathering steel system (A588/A709W) is excessive or uneconomical, and

4.Painting is undesirable or maintenance is intermittent.

Its use is justified in heavy industrial and equipment applications rather than architectural or code-controlled bridge projects, where its specific balance of strength and durability provides tangible lifecycle benefits. Successful application requires strict adherence to welding protocols and realistic expectations of its corrosion performance-it is not a direct substitute for true weathering steels.

 

Contact now

 

 

1. What is the key chemical difference that defines A514 Grade E?
A514 Grade E is distinguished by its elevated Molybdenum (Mo) content (0.20-0.30%), which provides enhanced atmospheric corrosion resistance (approximately 2× that of carbon steel) while maintaining the 100 ksi yield strength of the A514 family.

2. Is A514 Grade E considered a true weathering steel like A588?
No, it is not a full weathering steel. While it offers improved corrosion resistance (~2× carbon steel), true weathering steels like A588 or A709W provide 4–6× resistance and form a stable, self-protecting patina for fully unpainted exposure.

3. What is the primary application niche for A514 Grade E?
It is used for high-strength structural components exposed to outdoor environments but not requiring a painted or full weathering system, such as heavy equipment booms, frames, and industrial structures subject to moderate atmospheric conditions.

4. How does A514 Grade E compare to A514 Grade F in terms of availability?
A514 Grade E is less common and more specialized than Grade F. Grade F is the standard, widely available 100 ksi Q&T steel, while Grade E is specified only when its enhanced corrosion resistance is a required design feature.

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

info-500-499

Send Inquiry