Knowledge

What are the main chemical components of A517 Grade B?

Jan 20, 2026 Leave a message

info-488-172

A517 Grade B is a high-strength, quenched and tempered alloy steel plate, mainly used for pressure vessels and structural components that require excellent toughness and weldability, suitable for low-temperature and harsh working environments.

 

Mechanical Properties

Grade

Thickness
(in)

0.2% YS (ksi)

UTS (ksi)

Elongation in 2" 1)
(min %)

Reduction in area for rectangle specimens 2)
(min %)

Reduction in area for round specimens 3)
(min %)

B

0.188 - 1.250

100

115 - 135

16

35

45

 

Chemical Composition

C
(%)

Mn
(%)

P
(%)

S
(%)

Si
(%)

Cr
(%)

Mo
(%)

V
(%)

Ti
(%)

B
(%)

0.15 - 0.21

0.70 - 1.00

0.025

0.008 1)

0.15 - 0.35

0.40 - 0.65

0.15 - 0.25

0.03 - 0.08

0.01 - 0.04

0.0005 - 0.005

 

 

 

 

info-303-359

processing

Melting and Refining: The production of ASTM A517 Grade B begins with melting high-quality scrap and alloys in an electric arc furnace or basic oxygen furnace. The steel is refined to control carbon, manganese, chromium, molybdenum, vanadium, and boron within strict limits, ensuring the desired hardenability and weldability.

Casting: After refining, the molten steel is cast into ingots or continuous-cast slabs. These semi-finished products are inspected for surface defects and internal soundness to prevent quality issues in later stages.

Reheating and Hot Rolling: The slabs are reheated to a precise temperature and then hot-rolled into plates of the required thickness, width, and length. Controlled rolling practices are used to develop a fine, uniform grain structure, which enhances strength and toughness.

Quenching: Following rolling, the plates are rapidly quenched, usually in water or a controlled quenchant. This rapid cooling transforms the microstructure into martensite, a hard and strong phase that forms the basis of the steel's high strength.

Tempering: After quenching, the plates are tempered at a moderate temperature. This step relieves internal stresses, improves ductility and toughness, and stabilizes the mechanical properties while maintaining the high yield and tensile strength typical of A517 Grade B.

Straightening and Inspection: The heat-treated plates are straightened to ensure flatness and dimensional accuracy. They then undergo non-destructive testing, such as ultrasonic inspection, to detect any internal flaws.

Finishing Operations: The final steps include shot blasting to clean the surface, edge trimming for precise dimensions, and sometimes applying a protective coating. The plates are then ready for delivery or further fabrication.

 

 

 

info-798-545applications

Pressure Vessels and Storage Tanks: ASTM A517 Grade B is widely used in the construction of welded pressure vessels, including those for oil and gas processing, chemical plants, and power generation. Its high yield strength and good weldability allow designers to reduce plate thickness while maintaining structural integrity, resulting in lighter and more cost-effective equipment.

Heat Exchangers and Process Equipment: The steel's combination of strength and toughness makes it suitable for heat exchangers, boilers, and other process equipment operating under high pressure and temperature. Its ability to withstand thermal cycling and resist creep ensures reliable performance in demanding industrial environments.

Heavy Machinery and Structural Components: It is commonly employed in the manufacturing of heavy machinery, such as cranes, excavators, and offshore platforms. Key structural parts, including boom sections, chassis components, and load-bearing members, benefit from the material's high strength-to-weight ratio and excellent fatigue resistance.

Offshore and Subsea Structures: Due to its good low-temperature toughness and resistance to harsh marine conditions, ASTM A517 Grade B is used in offshore structures, including jackets, decks, and pipeline components. It provides the necessary strength to withstand wind, wave, and operational loads.

Bridges and High-Rise Buildings: In civil engineering, it is used for critical structural elements in bridges and high-rise buildings where high strength and durability are essential. Its use helps optimize design, reduce material weight, and enhance overall structural performance.

Contact now

 

Get an valued quotation for A517 Grade B, Contact GNEE Steel.

 

Does A517 Grade B require preheating before welding?

Yes, preheating is recommended before welding A517 Grade B. The usual preheating temperature is 100-150°C, which can reduce the cooling rate and avoid cold cracks in the weld.

 

What testing methods are used to inspect A517 Grade B?

Common testing methods include tensile testing, yield strength testing, impact testing, hardness testing, ultrasonic testing (UT) and visual inspection to ensure it meets relevant standard requirements.

 

Can A517 Grade B be used in pressure vessel manufacturing?

Yes, it is a preferred material for pressure vessel manufacturing. Its high strength, good toughness and excellent weldability make it suitable for vessels carrying high-pressure fluids or gases.

 

What is the melting point of A517 Grade B?

The melting point of A517 Grade B is around 1450-1500°C (2642-2732°F), similar to other alloy steels. This parameter is crucial for casting and welding processes.

 

What is the modulus of elasticity of A517 Grade B?

The modulus of elasticity of A517 Grade B is approximately 200 GPa (29×10⁶ psi) at room temperature, which reflects its stiffness and ability to resist elastic deformation.

 

Is A517 Grade B magnetic?

Yes, A517 Grade B is magnetic. As a ferrous alloy containing iron, it exhibits ferromagnetic properties, which can be utilized for non-destructive testing and material identification.

 

What is the fatigue strength of A517 Grade B?

The fatigue strength of A517 Grade B is about 300-350 MPa under repeated loading conditions. Proper structural design and surface treatment can further improve its fatigue resistance.

 

Can A517 Grade B be cold-formed?

It can be cold-formed with caution. Due to its high strength, cold forming requires higher forces, and post-forming heat treatment may be necessary to restore toughness and reduce residual stresses.

 

What industries commonly use A517 Grade B?

It is widely used in oil and gas, petrochemical, power generation, marine engineering and heavy machinery industries, where high-strength and durable materials are in great demand.

 

What are the storage requirements for A517 Grade B plates?

They should be stored in a dry and well-ventilated area to avoid moisture and corrosion. Plates need to be stacked horizontally with cushions to prevent deformation and surface damage.

Send Inquiry