Knowledge

What are the main applications of S355JR?

Jan 14, 2026 Leave a message

 

info-650-310

 

 

S355JR is a high-strength, low-carbon structural steel grade (EN 10025) known for its good weldability and toughness, with "S" for structural, "355" for its minimum 355 MPa yield strength, and "JR" indicating it passed a Charpy impact test at room temperature (20°C) with 27 Joules of energy absorption. It's used widely in construction, bridges, heavy machinery, and shipbuilding for load-bearing components requiring strength and durability.

 

Key Characteristics

Strength: High tensile and yield strength (≥355 MPa).

Weldability: Excellent, due to low carbon content, making it easy to weld.

Toughness: Good impact resistance, guaranteed by the "JR" test.

Classification: Non-alloy, hot-rolled structural steel.

 

Breakdown of the Name

S: Structural Steel.

355: Minimum Yield Strength in MPa (for thicknesses ≤16mm).

JR: Result of the Charpy impact test (27 Joules at +20°C).

 

info-317-155

S355JR is primarily used in structural applications requiring higher strength than S275 or S235 grades, without the need for low-temperature toughness. Its excellent strength-to-cost ratio and good weldability make it one of the most widely used structural steels globally.

Typical Applications Include:

Heavy Construction & Building Frames: Primary beams, columns, and trusses for industrial halls, commercial buildings, stadiums, and high-rise structures where high load-bearing capacity is essential.

Bridges & Infrastructure: Main girders, cross-beams, and support structures for road and railway bridges, viaducts, and overpasses.

Industrial Machinery & Equipment: Frames, bases, booms, and supporting components for cranes, excavators, mining equipment, agricultural machinery, and heavy transport vehicles.

Offshore & Energy Structures: Support platforms, walkways, and secondary structures in offshore oil & gas installations (non-primary, non-icy waters) and power plants.

Transportation & Logistics: Chassis for heavy trucks, trailer frames, container corners, and material-handling equipment like forklift masts.

General Heavy Fabrication: Pressure vessels (to approved codes), storage tanks, heavy-duty platforms, and staircases.

 

Why Choose S355JR Over Other Grades?

Higher Strength than S275JR: Offers approximately 29% higher yield strength (355 MPa vs. 275 MPa), enabling lighter sections, reduced weight, and material savings for the same load capacity.

Cost-Effective: Provides an optimal balance between increased strength and material cost compared to alloy or quenched & tempered steels.

Good Weldability & Formability: Can be welded and formed using standard methods, though thicker sections may require preheating and controlled procedures.

Wide Availability: As a fundamental EN 10025-2 grade, it is produced and stocked in large quantities worldwide.

 

Important Limitations:

Temperature Suitability: S355JR is impact-tested only at +20°C. It is not suitable for primary structural components exposed to sustained temperatures below 0°C, where grades like S355J0 or S355J2 must be used.

Corrosion Resistance: Like all carbon structural steels, it is not corrosion-resistant and requires protective coatings (e.g., painting, galvanizing) for outdoor or aggressive environments.

In summary, S355JR is the go-to high-strength structural steel for general construction and heavy engineering in temperate climates, chosen for its reliable strength, fabricability, and economic efficiency.

 

Contact now

 

1. What is S355JR steel?
S355JR is a non-alloy structural steel grade per EN 10025-2, with a minimum yield strength of 355 MPa and guaranteed impact toughness at room temperature (+20°C).

2. What is the yield strength of S355JR?
The minimum yield strength of S355JR is 355 MPa for nominal thickness up to 16 mm, decreasing for thicker sections as per EN 10025-2.

3. What does the 'JR' in S355JR mean?
The 'JR' indicates Charpy V-notch impact testing at +20°C, ensuring a minimum absorbed energy of 27 Joules for basic toughness.

4. Is S355JR equivalent to ASTM A572 Grade 50?
Not exactly. While both have similar yield strength (~345 MPa for A572 Gr 50 vs. 355 MPa for S355JR), they belong to different standards and have different chemical and testing requirements.

5. What are the main applications of S355JR?
It is widely used in heavy construction, bridges, industrial buildings, cranes, machinery frames, and offshore structures requiring higher strength than S275 grades.

6. What is the difference between S355JR and S355J2?
S355JR is impact tested at +20°C, while S355J2 is tested at -20°C, making J2 suitable for cold climate applications.

7. Can S355JR be welded?
Yes, S355JR has good weldability using common methods, though preheating may be required for thicker sections or strict service conditions.

8. What is the chemical composition of S355JR?
Typical composition includes max 0.24% Carbon, max 1.60% Manganese, and controlled phosphorus/sulfur (e.g., P ≤ 0.035%, S ≤ 0.035%).

9. Is S355JR corrosion resistant?
No, it is not corrosion-resistant. Protective coatings such as painting or galvanizing are necessary for outdoor or corrosive environments.

10. What is the difference between S355JR and S275JR?
The main difference is strength: S355JR has a higher minimum yield strength (355 MPa vs. 275 MPa), allowing lighter or stronger designs.

11. What are the mechanical properties of S355JR?
Key properties include yield strength ≥355 MPa (t≤16mm), tensile strength 470-630 MPa, and minimum elongation of 20-22% depending on thickness.

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

info-500-499

 

 

 

 

 

Send Inquiry