W21x68 High frequency welding H-beam for steel structure
W21x68 is another type of American standard H-beam (American standard W-beam or W-sections). The following is a detailed introduction to W21x68 H-beam:
W21x68 size specifications
Nominal depth: 21 inches (about 533.4 mm)
Weight: 68 pounds per foot (about 101.1 kilograms per meter)
Flange width: about 7.5 inches (about 190.5 mm)
Web thickness: about 0.5 inches (about 12.7 mm)
Flange thickness: about 0.715 inches (about 18.16 mm)
W21x68 h beam wide flange material and performance
Material standard: usually in accordance with ASTM A36/A36M, ASTM A572 Grade 50 or ASTM A992 standards. The minimum yield strength of A36 h shaped steel is 36,000 psi (about 250 MPa), while the minimum yield strength of A572 Grade 50 h beam metal and A992 h beam metal is 50,000 psi (about 345 MPa).
Tensile strength: Depending on the material grade, its tensile strength will also vary.
Elongation: Good ductility.
Application scope of W21x68 h beam wide flange
Due to its large cross-sectional size and high unit length weight, W21x68 w shape beam is suitable for application scenarios that require higher load-bearing capacity, such as beams and columns in large building structures, bridges and other engineering structures. It is often used in key parts that need to bear large loads to ensure the safety and stability of the structure.
Processing characteristics of W21x68 w shape beam
Weldability: Due to its well-controlled chemical composition, it has good welding performance.
Processing convenience: Easy to cut, drill and other mechanical processing, suitable for on-site construction requirements.


