Model Definition
In the W21x83 designation, W means wide flange profile, 21 means the nominal section height of 21 inches, about 533 mm, and 83 means the theoretical weight of 83 pounds per foot, about 123.7 kg per meter. The typical section height is 533 mm with a flange width of about 209 to 216 mm, and web and flange thicknesses per the AISC manual.
Material and Performance
The beam complies with ASTM A992, a low-alloy high-strength structural steel with trace vanadium and niobium additions. Mechanical properties are a yield strength of at least 345 MPa, 50 ksi, a tensile strength of at least 450 MPa, 65 ksi, an elongation of at least 18 percent, and a carbon equivalent of 0.45 percent maximum, giving excellent welding performance. Composition limits carbon to 0.23 percent, manganese 1.0 to 1.6 percent, phosphorus 0.035 percent, and sulfur 0.045 percent.
Structural Advantages
Compared with ordinary carbon steel such as A36, the strength is increased by about 40 percent, allowing steel weight reductions of 20 to 30 percent. The large lateral moment of inertia gives better stability than ordinary I-beams against wind vibration and seismic loads, and the wide-flange geometry simplifies cutting, drilling, and welding for complex nodes.
Applications
High-rise buildings use the beam as primary load-bearing members in large-span frames with outstanding seismic design performance; bridge engineering uses it for main beams, cross beams, and piers under dynamic loads; and industrial equipment uses it for heavy machinery bases, crane rails, and tank supports, reducing section size and foundation cost.
Supply Specifications
The beam is produced to ASTM, BS, GB, EN, JIS, and DIN standards with lengths of 6 to 12 m or custom, and a wide range of section sizes from H100 to H900 series can be customized.
Frequently Asked Questions
Q: What does W21x83 mean?
A: A 21-inch nominal wide flange beam weighing 83 lb per foot.
Q: What is the yield strength of A992?
A: 345 MPa minimum, 50 ksi.
Q: What is the tensile strength?
A: 450 MPa minimum, 65 ksi.
Q: What are the alloy additions?
A: Trace vanadium and niobium.
Q: What is the web width range?
A: 100 to 900 mm per the production range.
Q: What is the benefit over A36?
A: About 40 percent more strength with 20 to 30 percent weight saving.
For W21x83 and A992 wide flange beam quotations, contact our sales team.

