What is S235JR steel grade?
Grade S235JR has a minimum yield strength of 235 MPa. The impact energy at a room temperature of 20°C is at least 27 joules. Steels of grade S235JR are suitable for low-stressed parts in steel and mechanical engineering.
What is the difference between S235JR and S275JR steel?
S235JR has a minimum yield strength of 235 MPa, while S275JR has a minimum yield strength of 275 MPa. S275JR is stronger than S235JR and is typically used in more demanding applications such as heavy machinery, high-rise buildings, and large structures.
What are heb steel beams?
HEB steel beam is a wide flange beam used in building and engineering projects in Europe and around the world. "HEB" stands for "High Edge (or European) B". It has wider flanges and deeper thickness, which makes it stronger and more suitable for carrying heavier loads than HEA beams.
Features of HEB wide flange h beam
Robust design: HEB wf steel beam is designed to be stronger and heavier than HEA beam, with thicker flanges and webs for greater load-bearing capacity.
Dimensional proportions: With wide flanges and thicker webs, it can effectively resist bending and shear forces. The dimensional proportions are carefully designed to optimize structural efficiency in a variety of applications.
Application areas: Due to its strong and durable characteristics, HEB wide flange h beam is widely used in the construction of industrial buildings, bridges, heavy infrastructure, and in places where large spans or heavy loads are required.
Manufacturing standards: Like HEA, HEB is also produced according to European standards and meets high standards in quality, reliability and consistency.
| HEB | Dimensions mm |
Cross Section cm² |
Section Modulus cm³ |
Weight Kg/m |
||||
|---|---|---|---|---|---|---|---|---|
| h | b | s | t | F | Wx | Wy | ||
| HEB 100 | 100 | 100 | 6 | 10 | 26.04 | 89.9 | 33.5 | 20.4 |
| HEB 120 | 120 | 120 | 6.5 | 11 | 34.01 | 144.1 | 52.9 | 26.7 |
| HEB 140 | 140 | 140 | 7 | 12 | 42.96 | 215.6 | 78.5 | 33.7 |
| HEB 160 | 160 | 160 | 8 | 13 | 54.25 | 311.5 | 111.2 | 42.6 |
| HEB 180 | 180 | 180 | 8.5 | 14 | 65.25 | 425.7 | 151.4 | 51.2 |
| HEB 200 | 200 | 200 | 9 | 15 | 78.08 | 569.6 | 200.3 | 61.3 |
| HEB 220 | 220 | 220 | 9.5 | 16 | 91.04 | 735.5 | 258.5 | 71.5 |
| HEB 240 | 240 | 240 | 10 | 17 | 106 | 938.3 | 326.9 | 83.2 |
| HEB 260 | 260 | 260 | 10 | 17.5 | 118 | 1148 | 395 | 93 |
| HEB 280 | 280 | 280 | 10.5 | 18 | 131.4 | 1376 | 471 | 103 |
| HEB 300 | 300 | 300 | 11 | 19 | 149.1 | 1678 | 570.9 | 117 |
| HEB 320 | 320 | 300 | 11.5 | 20.5 | 161.3 | 1926 | 615.9 | 127 |
| HEB 340 | 340 | 300 | 12 | 21.5 | 170.9 | 2156 | 646 | 134 |
| HEB 360 | 360 | 300 | 12.5 | 22.5 | 180.6 | 2400 | 676.1 | 142 |
| HEB 400 | 400 | 300 | 13.5 | 24 | 197.8 | 2884 | 721.3 | 155 |
| HEB 450 | 450 | 300 | 14 | 26 | 218 | 3551 | 781.4 | 171 |
| HEB 500 | 500 | 300 | 14.5 | 28 | 238.6 | 4287 | 841.6 | 187 |
| HEB 550 | 550 | 300 | 15 | 29 | 254.1 | 4971 | 871.8 | 199 |
| HEB 600 | 600 | 300 | 15.5 | 30 | 270 | 5701 | 902 | 212 |
| HEB 650 | 650 | 300 | 16 | 31 | 286.3 | 6480 | 932.3 | 225 |
| HEB 700 | 700 | 300 | 17 | 32 | 306.4 | 7340 | 962.7 | 241 |
| HEB 800 | 800 | 300 | 17.5 | 33 | 334.2 | 8977 | 993.6 | 262 |
| HEB 900 | 900 | 300 | 18.5 | 35 | 371.3 | 10980 | 1054 | 291 |
| HEB 1000 | 1000 | 300 | 19 | 36 | 400 | 12890 | 1090 | 314 |
In what fields can S235JR HEB H-beam be used?
1. Industrial and civil building frames
Application scenarios: beams, columns, and supporting structures of factories, warehouses, commercial buildings, and residences.
Features: When used as main beams or columns, the high bending stiffness of the H-shaped steel section is used to bear vertical loads (such as floor weight) and horizontal loads (such as wind loads and earthquake loads).
For example: the HEB series is often used in the main frame of multi-story buildings.
2. Small and medium-sized bridge structures
Application scenarios: main beams, pier cap beams, and anti-collision guardrail brackets of highway bridges and railway bridges.
Features: The plasticity and toughness of S235JR meet the dynamic load requirements of bridges, and the high moment of inertia of H-shaped steel can reduce the deadweight of bridges and improve seismic performance.
For example: HEB or HEM series are used as main beams in simply supported beam bridges, and steel plates are welded to form a combined section.
3. Temporary construction trestle
Application scenarios: temporary passage trestle in water conservancy projects and bridge construction.
Features: Easy to install and disassemble quickly, the standardized size of HEB 300 H-beam is suitable for modular construction.
4. Industrial equipment rack
Application scenarios: Crane frame, conveyor equipment bracket, large machine tool base.
Features: The high rigidity of H-beam can reduce the vibration of equipment operation, and the flat flange is convenient for installing drive devices or guide rails.
For example: The main beam of the gantry crane adopts the HEB series.

GNEE Steel is an H-beam manufacturer, H-beam supplier and H-beam exporter. We are a company with 18 years of production experience and are committed to providing H-beams of various materials.
As an ISO-certified company, we produce a large number of H-shaped steel products and have a large number of international customers. The H-beam structure we provide to customers can be customized according to the size required and is used in many industries such as construction, bridges, marine, manufacturing, etc.
GNEE supports multi-specification and multi-brand H-beam customization. If you have customized requirements for profile steel, angle steel, and channel steel, please contact us!
| All specifications products can be customized according to customer requirements | |
| Grade | S355JR h type beam,S275JR steel beam,S355J2 h beam steel structure,S355J0 h section beam,S355NL h section steel,S355ML structural steel beam,A36 w flange beam,A572GR50 w shape beam,A992 w shape structural steel etc. |
| Standard | ASTM bs GB EN JIS DIN etc |
| Length | 6M,8m,9m,11m,12m or Customer's requirements |
| Flange Width | Customer's requirements |
| Flange Thickness | Customer's requirements |
| Web Width | Customer's requirements |
| Web Thickness | Customer's requirements |
| Payment | T/T, D/A, D/P, L/C, Western Union, MoneyGram or according to customer requirements. |
| MOQ | 1 TON, can be customized according to your requirements. |
Packing & Delivery:
| Packing | 1.By steel strips in bundles | ||
| 2.By Woven cloth with 7 slats | |||
| 3.By wooden pallet | |||
| 4.According to the requirements of customers | |||


