Knowledge

Using S690Q Steel Effectively in Large Structures

Dec 30, 2025 Leave a message

S690Q is a quenched and tempered high-yield-strength structural steel with a minimum yield strength of 690 MPa, defined in EN 10025-6. Using it effectively in large building structures is a design and fabrication challenge: the goal is not to increase the material strength itself, which is already developed by metallurgy, but to unlock and utilize that strength safely while overcoming the limitations of stability, connections, fatigue, and fabrication effects.

The strength of S690Q is often design-limited rather than material-limited. Member sizes in high-rise and long-span structures are frequently governed by stability criteria, deflection limits, connection capacity, and fatigue details rather than by the yield strength of the plate. Recognizing this is the first step toward a strategy that actually exploits the material.

Design and Analysis Strategies

Performance-based design: use advanced non-linear analysis such as pushover and finite element analysis to demonstrate real structural behavior, ductility, and collapse mechanisms, which can justify higher stress utilization and more efficient member sizing than prescriptive code limits alone.

Fracture control: specify the appropriate Charpy V-notch impact energy for the plate thickness and service temperature (for example at -40 deg C for the QL variants) and calculate the permissible flaw size, which drives the required non-destructive testing sensitivity.

Fatigue management: detail connections to avoid severe stress concentrations, apply the fatigue detail categories of the applicable design code, and consider post-weld treatments where cyclic loading is significant.

Hybrid design: use S690Q selectively in the members where its strength pays off most, such as heavily loaded columns and truss chords in lower floors, while using S355 or S460 for bracing, secondary members, and upper floors. This optimizes cost, weldability, and overall efficiency.

Connection strategy: prefer friction-grip high-strength bolted connections with properly prepared faying surfaces, and minimize field welding.

Welding and Fabrication Strategies

Welding is the area where poor practice can most degrade the performance of S690Q, mainly through heat-affected-zone (HAZ) softening and residual stress.

Consumables: use matching or slightly under-matching strength consumables. Over-matching consumables can increase cracking risk in the HAZ; the goal is joint ductility.

Process control: select low-hydrogen processes and control moisture in fluxes and shielding gases; qualify a welding procedure specification with precise heat input control, aiming at the lower end of the acceptable range to minimize the width of the softened zone.

HAZ softening mitigation: narrow-gap welding reduces weld volume and heat input; tandem or multi-wire processes raise deposition rate at a given travel speed; temper bead techniques can temper the HAZ of previous passes during repair welding.

Post-weld treatments for fatigue: grinding smooths weld toes to reduce stress concentration, peening introduces beneficial compressive residual stress, and high-frequency mechanical impact (HFMI) treatment is the most effective modern method for improving fatigue strength at welded details.

Cutting and forming: use precision thermal cutting with minimal heat effect, and avoid manual flame cutting on critical edges. Cold forming is possible but requires checking for strain aging and toughness reduction.

Construction and Erection Strategies

Tighter tolerances: high-strength slender members are less forgiving of misfit; implement stricter fabrication and erection tolerances to avoid unintended moments and stresses.

Erection sequencing: design temporary works and erection sequences so that stresses during erection, which can be high in partially braced conditions, remain within limits.

Bolted site splices: prefer bolted connections for site assembly, with calibrated torque control or direct tension indicators for preloaded bolts, to preserve material properties and simplify quality control.

Quality Assurance and Control

Enhanced non-destructive testing: ultrasonic examination of all butt welds and critical T-joints for planar flaws, and magnetic particle testing for surface-breaking defects in welds and high-stress areas.

Material traceability: maintain full traceability from mill test certificate to final position in the structure.

Weld parameter recording: use automated systems to record voltage, current, and travel speed for critical welds to verify heat input compliance.

Summary: The Mindset Shift

Using S690Q successfully is not a matter of simply replacing a lower-grade steel with a stronger one. The effective approach combines selective hybrid use of S690Q in compression- and tension-dominated members, HFMI treatment on critical welded details, and high-strength bolted connections for site assembly, supported by rigorous quality assurance. This balances performance, safety, cost, and constructability in large-scale structures.

Frequently Asked Questions

What is S690Q steel? S690Q is a quenched and tempered high-strength structural steel per EN 10025-6 with a minimum yield strength of 690 MPa, used for weight-critical and heavily loaded structures.

Why is the strength of S690Q often underutilized? Because member sizes are frequently governed by stability, deflection, connection capacity, and fatigue rather than by yield strength. Design codes also impose stress limits that a higher-strength material alone cannot overcome.

What welding consumables should be used for S690Q? Matching or slightly under-matching strength, low-hydrogen consumables, with a qualified welding procedure and controlled heat input to limit HAZ softening.

What is HAZ softening and how is it mitigated? The heat-affected zone beside the weld experiences a strength reduction compared with the base plate. It is mitigated by low heat input, narrow-gap welding, temper bead techniques, and design allowance for the softened zone.

Are bolted connections preferred over welded ones for S690Q? Yes, especially for site splices. High-strength friction-grip bolted connections avoid weld-related softening and residual stress and simplify on-site quality control.

What is HFMI treatment? High-frequency mechanical impact treatment is a post-weld technique that introduces deep compressive residual stress at the weld toe, substantially improving the fatigue strength of welded details in high-strength steel structures.

Send Inquiry