Hot-dip galvanized ASTM A36 steel channel is a workhorse section for structural, mechanical and architectural work. It combines a low-carbon structural base metal with a zinc coating that resists atmospheric corrosion, so the finished channel keeps its load-carrying capacity in outdoor, humid and mildly aggressive environments without repeated painting.
Base Metal and Coating Requirements
ASTM A36 is a carbon structural steel specification with a minimum yield point of 250 MPa (36 ksi) and a tensile strength of 400 to 550 MPa (58 to 80 ksi) across the product thicknesses covered by the standard. It welds readily, machines cleanly and is stocked in the channel sizes listed below.
The zinc layer is normally applied by the hot-dip process. Electro-galvanized, pre-galvanized, polished and color-coated finishes are offered where appearance or a thinner coating is preferred. ASTM A123/A123M sets a minimum average coating mass of 610 g/m2 (2.0 oz/ft2) for steel 1/16 in. (1.6 mm) thick and heavier, which is the reference figure most buyers quote when they specify coating weight.
Size Range and Sectional Properties
Both U channel and C channel profiles are produced from A36 and equivalent grades. Unit weight rises from 6.92 kg/m at 75 x 40 mm to 67.3 kg/m at 380 x 100 mm, with sectional areas from 8.818 cm2 to 85.71 cm2.
| Designation (mm) | Unit weight (kg/m) | Web t1 (mm) | Flange t2 (mm) | Sectional area (cm2) |
|---|---|---|---|---|
| 75 x 40 | 6.92 | 5 | 7 | 8.818 |
| 100 x 50 | 9.36 | 5 | 7.5 | 11.92 |
| 125 x 65 | 13.4 | 6 | 8 | 17.11 |
| 150 x 75 | 18.6 | 6.5 | 10 | 23.71 |
| 200 x 90 | 30.3 | 8 | 13.5 | 38.65 |
| 250 x 90 | 40.2 | 11 | 14.5 | 51.17 |
| 300 x 90 | 48.6 | 12 | 16 | 61.9 |
| 380 x 100 | 67.3 | 13 | 20 | 85.71 |
Heavier weights are available for the same outside dimensions where a thicker web or flange is required, for example 34.6 and 40.2 kg/m at 250 x 90 mm, or 38.1, 43.8 and 48.6 kg/m at 300 x 90 mm.
Types and Typical Applications
The family includes sub-ordinary channel, light channel, cold-formed equilateral channel, cold-formed unequal side channel, cold-rolled inner edge channel and cold-rolled outer edge channel. Typical uses are building structures and curtain wall framing, machinery and equipment fabrication, vehicle manufacturing, and general carbon structural work that calls for welding, riveting and dependable mechanical performance.
Surfaces, Lengths and Fabrication
Surfaces can be supplied as mild steel, hot-dip galvanized, pre-galvanized, polished or color coated. Thickness is available from 1 to 150 mm and length from 5.8 to 12 m, both customizable. Sections are produced by hot rolling, cold rolling or forging and can be cut, punched, drilled and welded repeatedly without loss of section integrity. Mill test certificates are issued with each shipment, and third-party inspection can be arranged on request.
Packing, Loading and Container Capacity
Lead time is typically 7 to 15 working days. Material ships in containers or by bulk vessel, packed for export with steel strips in bundles, woven cloth with slats, or wooden pallets. A 20 ft GP container measures 5898 x 2352 x 2393 mm and holds roughly 24 to 26 CBM; a 40 ft GP measures 12032 x 2352 x 2393 mm (about 54 CBM); a 40 ft high cube measures 12032 x 2352 x 2698 mm (about 68 CBM). Actual tonnage per container depends on section size and bundle pattern.
Frequently Asked Questions
Q: What is the minimum yield strength of an ASTM A36 steel channel?
A: 250 MPa (36 ksi), with tensile strength between 400 and 550 MPa (58 to 80 ksi).
Q: Which coating gives the longest outdoor service life?
A: Hot-dip galvanizing, because the coating reaches edges and internal corners; ASTM A123/A123M cites a minimum average coating mass of 610 g/m2 for steel 1/16 in. and heavier.
Q: Can a galvanized channel still be welded?
A: Yes, but the zinc must be removed from the weld zone first and the area re-protected afterwards, since zinc fume is hazardous and the coating is consumed by the arc.
Q: What lengths are supplied as standard?
A: 5.8 to 12 m, with custom cut lengths and pre-drilled sections available on request.
Q: How much material fits in a 40 ft high cube container?
A: About 68 CBM of usable volume, based on internal dimensions of 12032 x 2352 x 2698 mm; real tonnage depends on section size and packing method.

