Knowledge

Production method of sheet piling retaining wall

Nov 04, 2024 Leave a message

Production method of sheet piling retaining wall

 

Raw material preparation
Steel selection: Steel sheet piles generally use high-strength, corrosion-resistant steel as raw material. Common types of steel include low-carbon steel, low-alloy steel, etc.
Cutting: According to the design requirements, the steel is cut into plates of the required size and shape.


Heating treatment
Preheating: The cut steel is preheated to a temperature suitable for processing. Preheating can reduce the stress and deformation of the steel in subsequent processing.


Forming
Rolling: The preheated steel is rolled into the required cross-sectional shape by a rolling mill. Common cross-sectional shapes include U-shaped, Z-shaped and H-shaped.
Cold bending: For some special shapes of metal sheet piling, they can be formed by cold bending. Cold bending is to bend the steel into shape by mechanical pressure at room temperature.


Welding
Welded joints: If the sheet piles wall requires a longer length, it can be achieved by welding multiple shorter steel sheet pile sections. The quality of the weld should be ensured during the welding process to ensure the overall strength and stability of the steel sheet pile.
Weld treatment: After welding, the weld is polished, cleaned and inspected to ensure that there are no defects.

 

Surface treatment
Rust removal: Remove oxides and impurities on the surface of steel piling by sandblasting, pickling, etc.
Anti-corrosion treatment: In order to improve the corrosion resistance of sheet piling retaining wall, its surface is usually galvanized, painted or sprayed with anti-corrosion coatings.

 

Inspection and testing
Dimension inspection: Check whether the size of steel sheet wall meets the design requirements.
Mechanical property test: Through tensile test, bending test and other methods, check whether the mechanical properties of sheet pile meet the standards.
Appearance inspection: Check whether there are cracks, dents or other defects on the surface of steel sheet pile.

 

Special treatment
Pre-drilling: For some specific applications, it may be necessary to pre-drill holes on the steel sheet pile to facilitate the installation of other connectors or fixtures.
Custom processing: Depending on the project requirements, some special custom processing may also be required, such as cutting specific shapes, adding reinforcing ribs, etc.

 

u shaped steel sheet pile

Send Inquiry