
SA283 Grade C is a structural quality, low to intermediate tensile strength carbon steel plate used for general applications like structural components, tanks, and equipment, known for being easily weldable and machinable, with mechanical properties including a minimum yield strength of 30 ksi (205 MPa) and tensile strength of 55-75 ksi (380-515 MPa). It's an ASME/ASTM standard (A283/A283M) for structural use, distinct from pressure vessel steels, and is supplied as-rolled, offering good formability for various fabrications.
Key Characteristics:
Type: Structural Carbon Steel Plate.
Applications: General structural purposes, low-pressure tanks, building construction, equipment fabrication.
Strength: Low to intermediate tensile strength.
Weldability: Good, generally considered soft and easy to weld.
Mechanical Properties (Typical): Fabrication:
Yield Strength (Minimum): 30 ksi (205 MPa). Can be cut, drilled, machined, and ground to specific needs.
Tensile Strength: 55-75 ksi (380-515 MPa). May require preheating and low-hydrogen electrodes for welding in cold conditions.
Standards:
Governed by ASME SA-283/SA-283M and ASTM A283/A283M specifications.
Comparison:
Similar to A36 steel but with slightly different strength ranges.
Different from SA285 Grade C (for pressure vessels) and grades A, B, and D, which offer varying strength levels.

Chemical composition of carbon steel SA 283 Grade C (Max %):
| Thickness | C | Si | Mn | P | S | Cu (Min) |
| T≤40 | 0.24 | 0.40 | 0.9 | 0.035 | 0.04 | 0.2 |
| T>40 | 0.15/0.40 |
Mechanical properties of carbon steel SA 283 Grade C:
| Yield strength (Mpa) | Tensile strength (Mpa) | Elongation ≥, % |
| 205 | 380-515 | 22 |
The most typical use of carbon steel SA 283 Grade C is in heavy industry and oil plants for built steel tanks and vessels. BBN steel supply carbon steel SA 283 Grade C steel plates, SA 283 Grade C flat bars, SA 283 Grade C angle steel and SA283 Grade C angle steel. Along with delivery, the EN 10204 3.1 or EN 10204 3.2 MTC is also issued for you.
1. What is SA283 Grade C?
SA283 Grade C is a low-carbon, general-purpose structural steel plate in the ASTM A283 standard, commonly used for low-stress structural applications like tanks, bins, and building frames where welding and forming are required.
2. What is the yield strength of SA283 Grade C?
The minimum yield strength of SA283 Grade C is 30,000 psi (205 MPa), making it suitable for applications with moderate structural loads.
3. What is the difference between SA283 Grade A, B, C, and D?
The primary difference is increasing strength: Grade A (24 ksi min yield), Grade B (27 ksi), Grade C (30 ksi), and Grade D (33 ksi). Higher grades offer more strength but slightly less formability.
4. Is SA283 Grade C weldable?
Yes, SA283 Grade C has excellent weldability due to its low carbon content, making it suitable for most common welding methods like SMAW, GMAW, and SAW without requiring complex procedures.
5. What is SA283 Grade C equivalent to in Europe?
The closest European equivalent is S235JR (EN 10025-2) based on comparable yield strength (~235 MPa nominal) and general application. Note that S235JR has mandatory impact toughness.
6. Where is SA283 Grade C commonly used?
It is used in fabricating storage tanks, water towers, ductwork, building frames, agricultural equipment, and other general structural components not subjected to high stress or pressure.
7. Can SA283 Grade C be galvanized?
Yes, its low-carbon, low-alloy composition makes it an excellent candidate for hot-dip galvanizing, commonly used for outdoor structural components requiring corrosion protection.
8. What is the chemical composition of SA283 Grade C?
Typical composition includes Carbon (max 0.24%), Manganese (max 0.90%), Phosphorus (max 0.035%), and Sulfur (max 0.04%), ensuring good weldability and formability.
9. Is SA283 Grade C a pressure vessel steel?
No, it is not rated for pressure-retaining service. For pressure vessels, materials like SA516 Grade 60 or 70 (with notch toughness requirements) are specifically designed and coded for that purpose.
10. What is the difference between SA283 and A283?
There is no technical difference. A283 is the ASTM material standard, while SA283 is the ASME Boiler and Pressure Vessel Code adoption of the same standard, requiring ASME-compliant certification for code-bound components.
Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.


