Knowledge

S890QL1 High Strength Steel Sheet(HSLA)

Jan 16, 2026 Leave a message

info-503-426

S890QL1 is a high-yield strength, structural steel grade categorized under the European standard EN 10025-6. It is a quenched and tempered (Q+T) steel designed for heavy-duty applications where high load-bearing capacity and extreme low-temperature toughness are required.

 

 

 

 

 

 

 

Chemical composition % of steel S890QL1 (1.8925): EN 10025-6-2004

C Si Mn Ni P S Cr Mo V N Nb Ti Cu Zr B CEV
max 0.2 max 0.8 max 1.7 max 2 max 0.02 max 0.01 max 1.5 max 0.7 max 0.12 max 0.015 max 0.06 max 0.05 max 0.5 max 0.15 max 0.005 max 0.82


Mechanical properties of steel S890QL1 (1.8925)

Nominal thickness (mm): 3 - 50 50 - 100
Rm - Tensile strength (MPa) 940-1100 880-1100

 

Nominal thickness (mm): 3 - 50 50 - 100
ReH - Minimum yield strength (MPa) 890 830

 

KV - Impact energy (J) longitud., 0°
60
-20°
50
-40°
40
-60°
30

 

A - Min. elongation Lo = 5,65 √ So (%) 11


Equivalent grades of steel S890QL1 (1.8925)

EU
EN
Germany
DIN,WNr
S890QL1
EStE890V

 

 

 

info-303-359processing

1. Welding

Welding is the most critical processing step. S890QL1 can be welded using all conventional methods (MIG/MAG, MMA, SAW), but strict heat control is mandatory.

Preheating: Necessary to prevent cold cracking. Recommended temperatures are 150–250°C, increasing to 300°C for thicknesses over 30mm.

Filler Material: Use low-hydrogen electrodes (HD < 5 ml/100 g) to avoid hydrogen-induced cracking.

Heat Input: Limit heat input to prevent softening of the heat-affected zone (HAZ). High heat can destroy the grain structure created during the original tempering process.

2. Cutting and Forming

Thermal Cutting: Laser, plasma, and oxy-fuel cutting are all suitable. To avoid edge hardening, preheating may be required before flame cutting.

Cold Forming: S890QL1 has good bendability despite its hardness. Standard roll or free bending machinery can be used.

Note: Ensure the bending radius is large enough (typically at least 3–4 times the plate thickness) to prevent surface cracking.

3. Machining

The material can be machined using standard equipment, though its high strength increases tool wear.

Tools: High-speed steel (HSS) or carbide-tipped tools are recommended.

Stability: Use rigid machinery and secure workpieces to minimize vibrations, which can cause work hardening or tool breakage.

4. Heat Treatment

Because S890QL1 is delivered in a quenched and tempered state, additional heat treatment (like stress relieving) is generally discouraged unless absolutely necessary.

Heating above the original tempering temperature (typically ~550–600°C) will significantly reduce the steel's yield strength and toughness.

If stress relieving is required for critical weldments, it should be done at a lower temperature (e.g., ~530–580°C) with slow, controlled cooling.

 

 

info-557-358Core Industrial Applications

Lifting & Transportation:

It is a standard material for mobile crane booms, aerial platforms, and derrick structures. In the transport sector, it is used for lightweight chassis, dumper bodies, and articulated trucks to maximize payload capacity.

Heavy Machinery:

S890QL1 is used in the manufacturing of dipper sticks, bucket parts, and bulldozer blades for earthmoving and mining equipment.

Civil Engineering:

Engineers utilize this grade for high-load steel constructions such as bridges and high-voltage transmission towers, where its strength-to-weight ratio reduces overall material costs.

Energy & Offshore:

It is suitable for highly stressed offshore structures, turbine scroll cases, and penstocks. It is also suitability-tested for pressurized applications like storage tanks and pressure pipes.

Contact now

 

If you have project requirements for S890QL1, we welcome your inquiry. GNEE maintains a large inventory of commonly used high strength steel grades for your selection.For detailed mechanical properties, chemical composition, and technical data, as well as free samples, please contact our factory immediately. We offer competitive prices, stable quality, and professional service. Email:beam@gneesteelgroup.com.

 

What is S890QL1?

S890QL1 is a high-strength quenched and tempered structural steel. It belongs to the EN 10025-6 standard, featuring excellent weldability and toughness, widely used in heavy machinery and engineering structures.

 

What is the minimum yield strength of S890QL1?

The minimum yield strength of S890QL1 is 890 MPa. This high strength enables it to withstand heavy loads, making it suitable for manufacturing load-bearing components in harsh working environments.

 

Which standard does S890QL1 comply with?

S890QL1 complies with the European standard EN 10025-6, which specifies technical requirements for high-strength structural steels for quenched and tempered conditions, ensuring consistent quality and performance.

 

What is the typical tensile strength range of S890QL1?

The typical tensile strength range of S890QL1 is 940-1100 MPa. This range balances strength and ductility, allowing the steel to resist deformation and fracture under high tensile forces.

 

Is S890QL1 weldable?

Yes, S890QL1 has good weldability. Proper preheating and post-weld heat treatment are recommended to avoid cold cracking, ensuring the welded joints maintain the steel's original strength and toughness.

 

What is the recommended preheating temperature for welding S890QL1?

The recommended preheating temperature for S890QL1 is 100-150°C. This reduces the temperature gradient in the weld zone, preventing the formation of brittle microstructures and improving joint reliability.

 

What are the main chemical components of S890QL1?

Key components of S890QL1 include C (≤0.20%), Mn (≤1.80%), Si (≤0.60%), Cr (≤1.50%), Mo (≤0.60%), and Ni (≤1.00%), which contribute to its high strength and toughness.

 

What is the impact toughness of S890QL1?

S890QL1 exhibits excellent impact toughness, with a minimum Charpy V-notch impact energy of 30 J at -20°C. This ensures it performs well in low-temperature environments without brittle failure.

 

In which industries is S890QL1 commonly used?

S890QL1 is widely used in construction machinery, mining equipment, offshore structures, and heavy-duty vehicles. Its high strength helps reduce component weight while ensuring structural integrity.

 

Can S890QL1 be heat treated?

Yes, S890QL1 is already quenched and tempered during production. Additional heat treatment like stress relief annealing can be done to reduce residual stresses after welding or forming.

 

Send Inquiry