Knowledge

S690QL ultra high strength steel - EN 10025

Jan 04, 2026 Leave a message

S690Q is a hot-rolled hardened structural steel that has undergone subsequent tempering treatment and conforms to the EN 10025-6, DSTU EN 10025-6 standard.

Standard: Hot-rolled product made from structural steel. EN 10025-6: Technical delivery conditions for high-tensile structural steel post-tempering and quenching.

Classification: High-grade structural steel.

Product:Fine-grain steel post-quenching and tempering.

 

Chemical composition of S690Q steel according EN 10025-6, %

С

Si

Mn

P

S

N

B

Cr

Cu

Mo

Nb

Ni

Ti

V

Zr

0,20

0,80

1,70

0,025

0,015

0,015

0,005

1,50

0,50

0,70

0,06

2,0

0,05

0,12

0,15

 

Mechanical properties of S690Q steel

Nominal gauge, mm

Minimum yield strength, ReH (MPa)

Ultimate tensile strength, Rm (MPa)

Minimum elongation ratio σ, %

Brinell hardness number, HB (MPa)

> 3 ≤ 50

690

770-940

14

228-278

> 50 ≤ 100

650

760-930

14

225-276

> 100 ≤ 150

630

710-900

14

210-266

 

Analogues to S690Q steel

Germany (DIN)

StE690V

France (AFNOR)

E690T

 

Application

S690Q steel is used in structures subject to extreme loads: mining and heavy-construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.

 

Welding

S690Q steel is suited to welding done without preheating or subsequent heat treatment. It is organically weldable as its behaviour during and after welding depends not only on the material, but also on the sizes and shapes as well as the product operation conditions. The requirements for arc-welding must conform to the EN 1011-2 standard

As the product gauge and strength increase, cold-cracking may occur, caused by the following:

Large quantities of diffusing hydrogen in the weld-seam metal;

Significant tension-stress concentrations at the weld seam.

Fragile structure of the heat-affected zone;

Contact now

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.

 

1.What grade of steel is S690?

S690Q is a high-yield-strength structural steel grade defined in the European standard EN 10025-6, meaning it's a strong, fine-grained steel used for heavy loads, supplied in a quenched and tempered (Q+T) condition for enhanced strength and toughness, with a minimum yield strength of 690 MPa (megapascals). The 'S' denotes structural, '690' its strength, and 'Q' its heat treatment.

 

2.What is the difference between S690Q and S690QL?

S690Q: Minimum impact toughness tested at -20°C (30J average). → Typical Use: Cranes in temperate climates, quarry equipment. S690QL: Certified for -40°C and below (≥40J impact toughness). → Critical Use: Arctic pipelines, offshore platforms, mining vehicles in Siberia.

 

3.Is s690q a high end steel?

Yes, S690Q is considered a high-end, high-strength structural steel (HSLA) known for its excellent strength-to-weight ratio, superior toughness, and performance in demanding environments, making it ideal for heavy machinery, cranes, bridges, and other critical applications where traditional steels fall short.

Send Inquiry