S690QL is a high-strength, quenched and tempered structural steel known for its combination of high yield strength and excellent low-temperature toughness. In the grade name, S indicates structural steel, 690 is the minimum yield strength in megapascals, and QL denotes the quenched and tempered condition with a low-temperature toughness guarantee. The steel delivers a minimum yield strength of 690 MPa for thicknesses up to 50 mm, with tensile strength of 770 to 940 MPa and elongation of at least 14 percent. These properties make it suitable for weight-critical structures such as crane booms, offshore platforms, and large-span bridges, where higher strength allows thinner sections and significant weight savings.
What Is S690QL Steel?
S690QL is a high-strength, quenched and tempered structural steel supplied to EN 10025-6, the European standard for weldable fine-grain structural steels in the quenched and tempered condition. In the grade name, S stands for structural steel, 690 is the minimum yield strength in megapascals, and QL indicates the quenched and tempered condition with a guarantee of excellent low-temperature toughness. The steel is produced by controlled rolling and heat treatment, which refines the microstructure and balances high strength with adequate toughness. It is intended for heavy-duty, weight-critical structures where higher strength allows thinner sections and significant weight savings.
Chemical Composition
The composition of S690QL is controlled to reach 690 MPa yield strength while keeping the steel weldable. Maximum contents include carbon 0.20 percent, silicon 0.80 percent, manganese 1.70 percent, phosphorus 0.025 percent, and sulfur 0.015 percent. Hardening and toughness elements are limited to chromium 1.50 percent, nickel 2.0 percent, molybdenum 0.70 percent, copper 0.50 percent, and boron 0.0050 percent. Microalloying additions include niobium 0.06 percent, vanadium 0.12 percent, titanium 0.05 percent, and zirconium 0.15 percent, with nitrogen limited to 0.015 percent. This balance gives the steel its hardenability and low-temperature toughness.
Mechanical Properties
For thicknesses of 3 to 50 mm, the minimum yield strength of S690QL is 690 MPa, reducing to 650 MPa for 50 to 100 mm and 630 MPa for 100 to 150 mm. The tensile strength range is 770 to 940 MPa for the thinner range, 760 to 930 MPa for the middle range, and 710 to 900 MPa for the thickest range, with a minimum elongation of 14 percent. The QL designation means the steel has lower ductile-to-brittle transition temperatures and better impact performance at subzero conditions than the base S690Q grade. These properties make the steel suitable for mobile cranes, hydraulic supports, and large-span structures in cold climates.
Fabrication and Welding
Because of its high strength and hardenability, S690QL requires more stringent welding control than lower-strength grades such as S460NL. Preheat and interpass temperatures must be carefully managed to avoid cold cracking, especially in thick sections, and low-hydrogen consumables with controlled heat input are essential. Machining demands harder tool materials, lower cutting speeds, and effective cooling to reduce tool wear and keep dimensional accuracy. The steel has no inherent corrosion resistance, so protective coatings such as paint, zinc plating, or weathering treatments are applied for outdoor or aggressive environments.
Applications and Material Selection
S690QL is used in construction and infrastructure for bridges, high-rise buildings, and stadiums that need high load-bearing capacity and resilience. In heavy machinery, it is used for cranes, earth-moving equipment, and mining machinery that operate under extreme conditions. In transportation, it is used for heavy-duty trucks and trailers that need enhanced strength and durability. Compared with S355JR, S690QL has significantly higher yield and tensile strength, making it suitable for weight-saving structures such as crane booms and offshore platforms, while S355JR remains a general construction grade. Although the material cost is higher, the ability to use thinner sections often leads to overall savings in fabrication, transportation, and assembly.
Frequently Asked Questions
What are the key mechanical properties of S690QL? S690QL has a minimum yield strength of 690 MPa for thicknesses up to 50 mm, tensile strength of 770 to 940 MPa, elongation of at least 14 percent, and excellent low-temperature toughness.
How does S690QL compare with S355JR? S690QL has significantly higher yield and tensile strength than S355JR, making it suitable for weight-saving structures such as crane booms and offshore platforms.
What is the difference between S690Q and S690QL? The L in S690QL indicates improved low-temperature toughness, with lower ductile-to-brittle transition temperatures and better impact performance at subzero conditions.
What is the typical heat treatment for S690QL? The steel is produced by quenching followed by tempering, which refines the microstructure and balances high strength with adequate toughness.
What machining considerations apply to S690QL? Due to its high strength, machining requires harder tool materials, lower cutting speeds, and effective cooling to reduce tool wear and maintain dimensional accuracy.
What corrosion protection is needed for S690QL? S690QL has no inherent corrosion resistance, so protective coatings such as paint, zinc plating, or weathering treatments are applied for outdoor or aggressive environments.

