Knowledge

S690QL ---high strength steel plate

Jan 15, 2026 Leave a message

info-497-448

S690QL is a high‑strength structural steel known for its excellent combination of toughness, weldability, and formability. It is part of a family of quenched and tempered steels designed to provide reliable performance in demanding applications where heavy loads and harsh conditions are common. The material achieves its strength through careful heat treatment, which also enhances its ability to resist cracking and maintain structural integrity at low temperatures. Its consistent mechanical properties make it suitable for use in large, complex structures that require both durability and reduced weight. S690QL is often chosen for projects where high strength must be balanced with good fabrication characteristics, allowing for efficient manufacturing and assembly.

 

 

 

 

 

 

 

Chemical Composition – EN10025 S690QL

C Si Mn P S B Cr Cu Mo N Nb Ni Ti V Zr
0.20 0.80 1.70 0.020 0.010 0.005 1.50 0.50 0.70 0.015 0.06 2.0 0.05 0.12 0.15

 

Mechanical Properties – EN10025 S690QL

Plate thickness mm Yield strength Reh (MPA) Tensile strength Rm (MPA) Elongation A5 % minimum Impact strength J, minimum
3mm to 50mm 690 770 – 940 14 30 @ -40º C
50mm to 100mm 650 760 – 930 14 30 @ -40º C
100mm to 150mm 630 710 – 900 14 30 @ -40º C

 

 

info-492-498Core Processing Techniques

Cutting: S690QL plates can be cut using advanced technologies like CNC plasma, laser, or oxy-fuel. For thermal cutting, it is recommended to keep the material at least at room temperature to prevent issues.

Bending and Forming:

Cold Forming: Possible with powerful equipment. Recommended inside bend radii are typically >4×thickness for longitudinal and >3×thickness for transverse directions.

Hot Forming: Generally avoided above 580°C–600°C as it can alter the tempered state and degrade mechanical properties. If heated above this range, the material must undergo a new quenching and tempering process.

Welding: S690QL has good weldability but is sensitive to cooling rates.

Methods: MIG/MAG and TIG are commonly used.

Precautions: Pre-heating is often required to avoid cold cracking. Filler metals should have similar or slightly lower strength than the base metal.

Machining: For drilling, cobalt-alloyed high-speed steels (HSSCO) are recommended with a cutting speed of 17–19 m/min.

 

 

 

 

Production Workflow

The industrial production of S690QL involves a complex sequence to ensure its high-strength properties:

Refining & Casting: Converter refining followed by continuous casting.

Rolling: Controlled rolling and cooling to achieve the initial plate structure.

Heat Treatment (Q+T): The defining step where the plate is quenched (rapidly cooled in water from above its critical temperature) to harden it, followed by tempering (re-heating to below the critical point) to restore toughness and ductility.

Finishing: Straightening, surface inspection, and ultrasonic flaw detection.

 

Applications

Due to its lean design potential (allowing for lighter structures with the same load capacity), S690QL is used in:

Mobile Equipment: Cranes, lifting gear, and heavy-duty dump trucks.

Fixed Structures: High-rise buildings, long-span bridges, and offshore platforms.

Mining: Excavators, bulldozers, and hydraulic supports.

Contact now

 

Get an valued quotation for S690QL, Contact GNEE Steel.

 

 

What is S690QL?

S690QL is a high-strength quenched and tempered structural steel. It offers excellent weldability, toughness and mechanical properties, widely used in heavy-duty engineering structures.

 

What is the minimum yield strength of S690QL?

The minimum yield strength of S690QL is 690 MPa. This high strength enables it to bear heavy loads in large-scale machinery and construction projects.

 

What standards does S690QL comply with?

S690QL complies with the EN 10025-6 standard, which specifies technical requirements for high-strength structural steels in quenched and tempered conditions.

 

Can S690QL be welded easily?

Yes, S690QL has good weldability. Proper preheating and post-weld heat treatment are recommended to avoid cold cracks and ensure weld joint integrity.

 

What is the typical application of S690QL?

It is commonly used in cranes, excavators, bridge structures, offshore platforms and mining equipment due to its high strength and durability.

 

What is the hardness range of S690QL?

The hardness range of S690QL is usually 210-260 HBW. This hardness balances strength and machinability for various engineering uses.

 

Is S690QL corrosion-resistant?

S690QL has moderate corrosion resistance. For harsh environments, additional protection like painting, galvanizing or coating is required.

 

What is the maximum thickness of S690QL available?

S690QL is available in thicknesses up to 200 mm. Thicker plates are suitable for heavy-duty structures requiring high load-bearing capacity.

 

What is the difference between S690QL and S700MC?

S690QL is quenched and tempered, while S700MC is hot-rolled. S690QL has higher toughness, suitable for static structures; S700MC for formed parts.

Send Inquiry