Products Description
S690QL steel plate is a European standard special alloy structural steel, which belongs to quenched and tempered high yield strength structural steel, S means structural steel, 690 is the yield value, in MPa, Q means the delivery condition, L means the minimum value of impact energy specified when the temperature is not lower than -50℃.

Chemical composition of S690QL steel plate (melting analysis)
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | V | Ti | N | Zr | B |
| ≤0.2 | ≤0.8 | ≤1.7 | ≤0.02 | ≤0.010 | ≤2 | ≤1.5 | ≤0.7 | ≤0.5 | ≤0.06 | ≤0.12 | ≤0.05 | ≤0.015 | ≤0.15 | ≤0.005 |
Mechanical properties and yield tensile strength of S690QL steel plate
| Delivery Status | Thickness | Mechanical properties | |
| Quenched and tempered | 3-50mm | ReH(MPa) | ≥690 |
| Rm(MPa) | 770-940 | ||
| A(%) | ≥14 | ||
| Impact temperature | -40 | ||
| Longitudinal Akv(J) | ≥30 | ||
| >50-100mm | ReH(MPa) | ≥650 | |
| Rm(MPa) | 760-930 | ||
| A(%) | ≥14 | ||
| Impact temperature | -40 | ||
| Longitudinal Akv(J) | ≥30 | ||
| >100-150mm | ReH(MPa) | ≥630 | |
| Rm(MPa) | 710-900 | ||
| A(%) | ≥14 | ||
| Impact temperature | -40 | ||
| Longitudinal Akv(J) | ≥30 | ||
Products Application
EN10025-6 S690QL 1.8928 high yield structural steel plates are mainly used for construction machinery, mining machinery, all kinds of engineering machinery, such as the drilling rig, the electric shovel, the electric wheel dump, the mine motor, the excavator, and the loader for all kinds of engineering construction., etc.
S690QL steel plate smelting method
Converter / electric furnace steelmaking → LF furnace refining → VD furnace vacuum degassing → continuous casting / die casting / electroslag → cleaning and heating → rolling → flaw detection → heat treatment → steel plate finishing → sampling → performance inspection.


