Hot-dip galvanized steel pipe made from Q235B and other low-carbon structural steel grades combines the mechanical strength of welded steel pipe with the corrosion protection of a zinc coating. The pipe is produced by high-frequency welding, with the inner and outer weld seams removable, and is available in a wide range of diameters, wall thicknesses, and end preparations. This article describes the specifications, properties, and applications of hot-dip galvanized Q235B steel pipe.
Product Specifications
The standard product range covers outer diameters from 20 to 406.4 mm, wall thicknesses from 1.2 to 20 mm, and lengths from 1 to 12 m, with custom lengths available. The zinc coating weight is 200 to 600 g/m2, equivalent to a coating thickness of about 20 to 83 microns. Pipe ends can be supplied plain, beveled, threaded, or with sockets, PVC clamps, couplings, or clamps as required. Surface treatments include pre-galvanized, hot-dipped galvanized, and hang-planting galvanization, and certification to API, CE, or SASO can be arranged when required by the project.
Steel Grades and Standards
The pipes are made from low-carbon structural steels including Q195, Q235A and Q235B, Q345A to Q345E, 20#, 10#, and 16Mn, as well as international grades such as ASTM A36, A500, A53, and A106, SS400, St37, St52, and S235JR. The product is manufactured to standards including GB/T 3091 for welded steel pipes, GB/T 13912 for hot-dip galvanized coatings, BS 1387, and ASTM F1083. Third-party inspection by organizations such as BV or SGS is available on request, and delivery times are typically 10 days from stock and 15 to 20 days for custom production depending on quantity.
Chemical Composition and Mechanical Properties
For Q235 steel, the carbon content is 0.12 to 0.20%, manganese 0.30 to 0.67%, silicon 0.30% maximum, sulfur 0.045% maximum, and phosphorus 0.04% maximum, with a minimum yield strength of 235 MPa, a tensile strength of 375 to 500 MPa, and a minimum elongation of 26%. The comparable values for other grades in the family range from a minimum yield strength of 195 MPa for Q195 to 345 MPa for Q345. These properties provide sufficient strength for structural, plumbing, and agricultural applications while the low carbon content supports welding and forming.
Applications
Hot-dip galvanized steel pipes are highly versatile and widely used in water supply and plumbing systems for homes, commercial buildings, and industrial pipelines, and in sewer systems. Construction applications include scaffolding, fencing, railings, and greenhouse frames, as well as industrial buildings and general structural applications. Agricultural irrigation systems and the petrochemical, chemical, and electric power sectors also use the pipes for fluid transport and structural support. The zinc coating provides excellent corrosion resistance, giving the pipes a service life of 30 to 70 years depending on coating quality and environmental conditions, and the customizable ends allow direct installation with standard fittings.
Frequently Asked Questions
What does DN80 mean for galvanized steel pipe?
DN80 is the nominal diameter of the pipe, referring to a nominal bore of 80 mm. It is a common size for greenhouse frames, fire water supply, and general plumbing systems.
What is the zinc coating weight of hot-dip galvanized pipe?
The coating weight is typically 200 to 600 g/m2, corresponding to a coating thickness of about 20 to 83 microns, which determines the corrosion protection level and service life.
What standards apply to hot-dip galvanized Q235B pipe?
The pipes are manufactured to standards such as GB/T 3091 for welded steel pipes, GB/T 13912 for hot-dip galvanized coatings, BS 1387, and ASTM F1083, depending on the market and project requirements.
What is the service life of hot-dip galvanized steel pipe?
With a proper zinc coating, the service life is typically 30 to 70 years depending on coating quality and environmental conditions, making it economical for long-term installations.
Can the pipe ends be customized?
Yes. Plain, beveled, threaded, and socket ends are available, as well as PVC clamps, couplings, or clamps, and necking or punching can be performed for special designs.
What steel grades are used for galvanized pipes?
Common grades include Q195, Q235A and Q235B, Q345A to Q345E, 20#, 10#, 16Mn, and international grades such as ASTM A36, A500, A53, A106, SS400, St37, St52, and S235JR.

