Knowledge

Q235 Grade

Aug 26, 2024 Leave a message

  ↵

Q235 Grade

 

Q235 Grade Products Description

According to the GB/T 700-2006 standard, carbon structural steel Q235 is classified into four categories based on metallurgical quality: A, B, C, and D. The chemical makeup of Q235A, B, C, and D differs. The sulfur concentration of A, B, C, and D declines sequentially, while the phosphorus content of A and B is the same, followed by that of C, and the phosphorus level of D is the lowest. Different grades of Q235A, Q235B, Q235C, and Q235D correspond to different impact temperatures. A indicates no influence, B is greater than 20 degrees, C is greater than 0 degrees, and D is greater than -20 degrees.

Weldability

Q235 steel has strong weldability and may be easily welded using conventional techniques such as arc, resistance, and gas welding. This feature enables the manufacture and joining of Q235 steel components.

Ductility and Formability

Q235 steel has excellent ductility, allowing for plastic deformation without fracture. This characteristic enables easy shaping, forming, and bending during industrial processes.

Machinability

Q235 steel has strong machinability, making it suitable for typical machining operations such cutting, drilling, and milling.

Corrosion Resistance

While Q235 steel is not inherently corrosion-resistant, it can be protected from corrosion through various methods, such as applying coatings or using galvanized or stainless steel versions of Q235.

It is crucial to note that the particular properties of Q235 steel can change depending on heat treatment, manufacturing procedures, and material variances. As a result, it is best to check the necessary specifications and standards for precise and detailed property information for specific applications.

 

Q235 Grade Product Details

Q235 Physical Properties

Performance Value
Density 7.85 g/cm³
Melting Point 1420-1460°C
Thermal Conductivity 51.9 W/(m·K)
Coefficient of Linear Expansion (20°C) 11.7 µm/m·K

Q235 Mechanical Properties

Performance Value
Yield Strength (σy) ≥ 235 MPa
Tensile Strength (σb) 375-500 MPa
Elongation (δ) ≥ 26%
Impact Toughness (J) ≥ 27 J
Hardness (HB) ≤ 201(for cone hardness tester)

 

 hot rolled steel Product Pictures

 

32f218c00ab31fea3a9aa63defba7df

 

GNEE Group Customer Visit

 

hot rolled angle

 

If you have more needs and questions about Q235 Grade steel, we are happy to advise you!

 

 

 

 

 

 

 

Send Inquiry