
S690QL1 is a high-performance, quenched and tempered high-strength structural steel grade defined by the EN 10025-6 standard. It is specifically engineered for demanding load-bearing applications in extremely cold environments.
Equivalent CET(CEV)
| GRADE | S690QL EN10137-2 EN10025-6:2004 |
A709-100 | TStE690V DILLIMAX 690 NAXTRA 70 |
E690T E690TFP S690T |
FeE690VKT | 2625 WELDOX 700 |
E690 | JFE HITEN 780LE | ALFORM 700 |
| STANDARDS | EN | ASTM | DIN , WNr |
AFNOR/ NF A36- 204 |
EN | SS | ISO 4952 | JIS | |
| COUNTRY | EUROPE | USA | GERMANY | FRANCE | EUROPEAN (OLD) | SWEDON | INTER | JAPAN | AUSTRIA |
CHEMICAL COMPOSITION
| C | Si | Mn | P | S | B | Cr | Cu | Mo |
| 0.20 | 0.80 | 1.70 | 0.020 | 0.010 | 0.005 | 1.50 | 0.50 | 0.70 |
| N | Nb* | Ni | Ti* | V* | Zr* | |||
| 0.015 | 0.06 | 2.0 | 0.05 | 0.12 | 0.15 |
Mechanical Properties
| Plate Thickness | Yield Strength | Tensile Strength | Elongation | Impact Strength |
| MM | ReH (MPa) | Rm (MPa) | A5 % Minimum | J, Minimum |
| 3 to 50 | 690 | 770 - 940 | 14 | 30 @ -40º C |
| > 50 to 100 | 650 | 760 - 930 | 14 | 30 @ -40º C |
| > 100 to 150 | 630 | 710 - 900 | 14 | 30 @ -40º C |
processing steps
Preprocessing:
First, conduct edge preparation on S690QL1 steel plates, such as grinding or beveling, to remove oxides, oil stains, and impurities. This avoids cracking during subsequent welding and ensures tight joint fit, laying a foundation for stable processing quality.
Cutting:
Adopt flame or plasma cutting. Control cutting speed and heat input to prevent excessive local heating, which may damage the quenched-tempered microstructure and reduce material toughness. Avoid rough edges that require additional trimming.
Forming:
Cold bending is feasible for simple shapes but requires higher forming force. For complex structures, controlled low-temperature heating is optional to reduce springback and avoid cracking. Post-forming inspection ensures no structural deformation.
Welding:
Preheat to 80-120℃ and maintain interpass temperature strictly. Use low-hydrogen welding consumables to prevent hydrogen-induced cracking. Avoid overheating; post-weld heat treatment may be performed for critical components to relieve residual stress.
Finishing:
Conduct machining with hard tooling and reduced cutting speed due to high strength. Clean the surface and inspect for defects, ensuring mechanical properties of the final product meet application requirements.
applications
Construction Machinery
Used for booms, arms, chassis, and frames of excavators, loaders, bulldozers, and concrete pump trucks, where high strength and resistance to dynamic loads are required.
Mining and Quarry Equipment
Applied in dump truck bodies, hoppers, and structural components exposed to heavy impact and abrasion, helping to reduce weight while maintaining durability.
Cranes and Lifting Equipment
Utilized in crane booms, outriggers, and supporting structures for mobile and port cranes, providing the necessary strength and toughness under heavy lifting conditions.
Large Steel Structures
Used in bridges, industrial buildings, and tower structures where high load‑bearing capacity and reduced weight contribute to more efficient and economical designs.
Specialized Vehicles
Found in fire trucks, aerial work platforms, and other special vehicles that demand strong, stable, and lightweight structures for safe and reliable operation.
Offshore and Energy Equipment
Employed in offshore platforms, wind turbine components, and other energy‑related structures that require good performance in harsh and corrosive environments.
Contact us at beam@gneesteelgroup.com for pricing, technical support, or customized solutions. We are always ready to support your project.
What is the minimum yield strength of S690QL1?
The minimum yield strength of S690QL1 is 690 MPa. This high yield strength makes it ideal for structures requiring high load-bearing capacity and resistance to deformation.
What is the tensile strength range of S690QL1?
The tensile strength of S690QL1 ranges from 770 MPa to 940 MPa. This range ensures sufficient strength margin for critical engineering components under various stress conditions.
What is the chemical composition main element of S690QL1?
The main chemical elements of S690QL1 include carbon (C), manganese (Mn), silicon (Si), chromium (Cr), molybdenum (Mo), and nickel (Ni), enhancing its strength and toughness.
What is the hardness of S690QL1?
The Brinell hardness of S690QL1 is usually 210-260 HBW. This hardness balances strength and machinability, suitable for components needing both durability and processability.
What is the application of S690QL1 in construction?
In construction, S690QL1 is used for high-rise building steel structures, bridges, and crane beams. Its high strength reduces material weight, optimizing structural design.
Can S690QL1 be used in offshore environments?
Yes, S690QL1 can be used in offshore environments with proper corrosion protection. It resists harsh marine conditions when coated or galvanized, ideal for offshore platforms.
What is the cost comparison of S690QL1 vs. ordinary steel?
S690QL1 is more expensive than ordinary carbon steel, but its high strength reduces material usage, offsetting costs in weight-sensitive and high-performance applications.
Can S690QL1 be used in automotive industry?
Yes, it is used in heavy-duty automotive parts like truck frames and crane components. Its high strength improves load capacity and durability of commercial vehicles.
What is the hardness of S690QL1?
The Brinell hardness of S690QL1 is usually 210-260 HBW. This hardness balances strength and machinability, suitable for components needing both durability and processability.
What is the application of S690QL1 in construction?
In construction, S690QL1 is used for high-rise building steel structures, bridges, and crane beams. Its high strength reduces material weight, optimizing structural design.
Can S690QL1 be used in offshore environments?
Yes, S690QL1 can be used in offshore environments with proper corrosion protection. It resists harsh marine conditions when coated or galvanized, ideal for offshore platforms.

